Download
Share
Print this page
RHINO HPP14 FLEX Operating Manual
  1. Manuals
  2. Brands
  3. RHINO Manuals
  4. Power Pack
  5. HPP14 FLEX
  6. Operating manual

RHINO HPP14 FLEX Operating Manual

Hydraulic power pack
Hide thumbs

Advertisement

Quick Links

Download this manual
HPP14 FLEX
Hydraulic Power pack
From serial
number 16324
Revised
06.21.2021
Prior to Operation
We thank you for choosing a
®
Rhino
Powerpack.
Please note that the power-
pack is delivered without
hydraulic oil, and therefore it
must be filled up with hydraulic
oil prior to operation.
To ensure smooth operation
and long-lasting performance
of your new powerpack, we
recommend that you study this
operating manual carefully and
pay special attention to the
Safety and Service
Precautions
We hope you will be satisfied
with your new Rhino
®
Hydraulic Power Pack.
Best regards,
Rhino
®
Tool Company
Rhino Tool Co. Inc.
1134 West South St.
P.O. Box 111
Kewanee, IL 61443
Tel: 309.853.5555 main
Tel: 866.707.1808 toll-free
Fax: 309.856.5905
service@rhinotool.com
www.rhinotool.com
000701.06.22.21

Advertisement

loading
Need help?

Need help?

Do you have a question about the HPP14 FLEX and is the answer not in the manual?

Questions and answers

Related Manuals for RHINO HPP14 FLEX

Summary of Contents for RHINO HPP14 FLEX

  • Page 1 Rhino Tool Co. Inc. 1134 West South St. Safety and Service P.O. Box 111 Precautions Kewanee, IL 61443 We hope you will be satisfied Tel: 309.853.5555 main...

  • Page 3: Table Of Contents

    Contents Page Safety Precautions .................... 2 Filling up Hydraulic Oil ..................2 Technical Data ....................3 Starting Instructions ..................4 Service, Maintenance and Hydraulic Settings ............5 Oil Types ......................6 Warranty Terms ....................8 Parts.......................10...

  • Page 5: Safety Precautions

    Safety Precautions 1. Always use protective earplugs. The powerpack complies with the EU noise limits, but by daily long-lasting operation there is a risk of hearing defects. 2. Always connect hoses before starting. 3. Never add fuel and oil when the engine is running. 4.

  • Page 6: Technical Data

    Technical Data Hydraulics The Rhino HPP14 open centre hydraulic powerpack is designed in accordance with ® the EHTMA categories C and D, which prescribe a minimum performance of 5 g.p.m. (20 l.p.m.) at 2000 psi (138 bar) and 8 g.p.m (30 l.p.m.) at 2000 psi (138 bar), respectively.

  • Page 7: Starting Instructions

    Starting Instructions Please observe the starting instructions on the front of the powerpack.  Check engine oil level Start:  Check hydraulic oil level at sight glass  Connect hoses and tool  Switch fuel tap to “ON”  Activate choke ...

  • Page 8: Service, Maintenance And Hydraulic Settings

    Service, Maintenance and Hydraulic Settings Service/Maintenance Daily Weekly Yearly Engine oil Check 1 x replacement Hydraulic oil Check 1 x replacement Hydraulic oil filter *) 1 x replacement Check hoses (tighten up if needed) Air filter 1 x replacement Fuel filter 1 x replacement *Use only filters with by-pass Hydraulic Settings...

  • Page 9: Oil Types

    Oil Types The Rhino powerpack uses standard hydraulic oil, i.e. all types of mineral oil ® and biodegradable oil, which comply with the following values: Below 50°F 50 … 86°F Above 86°F Ambient temperature range (10 °C) (10 … 30°C) (30°C)

  • Page 11: Warranty Terms

    This Limited Warranty is non-transferable. In the event of a warranty claim, the Hydraulic Tool(s) must be returned freight prepaid to Rhino or delivered in person to a Registered Rhino Servicing Dealer within the applicable warranty period with proof of original purchase provided.
  • Page 20 Rhino Tool Co. Inc. 1134 West South St. P.O. Box 111 Kewanee, IL 61443 Tel: 309.853.5555 main Tel: 309.853.5555 main Tel: 866.707.1808 toll-free Tel: 866.707.1808 toll-free Fax: 309.856.5905 Fax: 309.856.5905 service@rhinotool.com service@rhinotool.com www.rhinotool.com www.rhinotool.com...