Advertisement
English
Quick guide
Inserting the batteries
1 Pull out the back cover of remote control
2 Insert AAA or R03 batteries
(can be used ~ 1 year)
3 Close the cover
Clock setting
1 Press CLOCK
2 Set the time
3 Confi rm
Basic operation
1 Select the desired mode
AUTO
COOL
2 Start/stop the operation
• Please note that the
display to start the unit.
3 Select the desired temperature
• Selection range for COOL/DRY mode:
16 °C ~ 30 °C.
• Operating the unit within the recommended
temperature range may save energy.
COOL: 26 °C ~ 28 °C.
DRY : 1 °C ~ 2 °C lower than room
temperature.
• To dim or restore the unit's indicator brightness,
press
and hold for 5 seconds.
• Use remote control within 8 m from the remote
control receiver of the indoor unit.
The illustrations in this manual are for explanation
purposes only and may differ from the actual unit.
They are subject to change without notice for future
improvement.
DRY
POWER
indication is on
中文
目錄
安全措施 .................................................... 4-5
如何使用 .................................................... 6-7
清洗說明 ....................................................... 8
故障檢修 ....................................................... 9
信息 ......................................................... 封底
附件
• 遙控器
• AAA 或 R03 電池 × 2
• 遙控器托架
• 用於遙控器托架的螺釘 × 2
English
Table of contents
Safety precautions ................................. 10-11
How to use............................................. 12-13
Cleaning instructions .................................. 14
Troubleshooting ......................................... 15
Information................................... Back cover
Accessories
• Remote control
• AAA or R03 batteries × 2
• Remote control holder
• Screws for remote control holder × 2
3
Advertisement
