Advertisement
ES50-ES100
Effluent Pumps
Motor runs for short time then stops. Then after
short period starts again. Indicates tripping
overload caused by symptom shown.
1. Inlet in pump base may be clogged. Remove
pump and clean out openings.
2. Impeller or volute openings may be plugged or
partially plugged. Remove pump and clean out.
3. Pump impeller may be partially clogged causing
motor to run slow, resulting in motor overload.
Clear impeller.
4. Defective motor stator; return to authorized
service center.
W
VoId
arranty Is
1. Using an extension cord.
2. Power cord has been cut or the grounding
prong removed or using an adapter fitting.
3. The switch has been disassembled or tampered
with.
4. Any tags or labels have been removed.
5. Used in a heavy grease application
6. Used in applications exceeding the designed
temperature range of 32 - 104 degrees F.
Register your product at www.ionproducts.net
...
If
OPERATION MANUAL
Dated: 11/02/2016
Document Name: ES50-ES100_OM
Page 8 of 12
Advertisement
