Hawking GS400T Specifications

GS400T
Get Connected With Hawking
! Full Wire 100/1000Mbps Speed
! Use Category 5 Cabling
! 19" Rack Mount
! Quick and Easy Installation
! Free Technical Support
Gigabit On Copper
Today's networks require a higher level of performance to
give you to compete in the marketplace. Hawking's
GS400T Gigabit Ethernet Switch solutions equip you with
easy-to-use, standards-based technology that delivers the
throughput your users demand using the Ethernet
technology. 1000BASE-T is Ethernet that provides
speeds of 1000 Mbps over Category 5 copper cabling.
The IEEE Standards Committee formally ratified
1000BASE-T as an Ethernet standard in June 1999.
The Hawking's GS400T Gigabit Switch provides 4 RJ-45
1000BASE-T ports as Gigabit Backbone to connect
workgroup 100/1000 Switch to increases the performance
of your network. The GS400T provides a full wire-rate
Gigabit Switch port for greater network performance.
Migrating Ethernet/Fast Ethernet
Networks Toward High-Speed
Networking
The first upgrade phase is implemented in three areas:
Upgrading the backbone with a 100/1000 Mbps
Fast Ethernet/Gigabit Ethernet switch
Upgrading the workgroup switches that support
power users or large workgroups with Gigabit
Ethernet uplink
Implementing 100/1000 Mbps Fast
Ethernet/Gigabit Ethernet NICs in key servers
As a result, the speed of the backbone increases tenfold
to accommodate the overall increase in network
bandwidth demand while the investment in existing
workgroup switches, end-station NICs, and existing
cabling is preserved.
The second migration phase is the upgrading of power
users to 100/1000 Mbps Fast Ethernet/Gigabit Ethernet
NICs. Gigabit Ethernet to the desktop will be supported,
giving power users full access to the resources of the
network.