Hawking FX200ES Specifications

FX200ES
Get Connected With Hawking
One 100Base-FX Fiber Optical Port
One 10Base-T/100Base-TX auto-sense
port.
62.5/125 multimode fiber optical connect
up to 2000 meter (6560 ft.)
Store-and-forward architecture with wire-
speed filtering and forwarding rates.
8K Mac Address entry
Easy to use, Easy to install
Free Tech Support
Extended Your Network Distance and
Security
The Hawking FX200ES Fiber Switch is a low cost
solution for connecting a fiber optical to regular
10Base-T Ethernet or 100Base-TX Fast Ethernet
network to extend the network distance to 2000
meters (6560 ft.). It is great for intra-building
connection or the distance beyond 100 meters
(328ft). It transmits up to 200Mbps speed.

Switching Technology

Switching is a cost-effective way of increasing the
total network capacity available to users on a local
area network. A switch increases capacity and
decreases network loading by dividing a local area
network into different segments, which don't compete
with each other for network transmission capacity.
The switch acts as a high-speed selective bridge
between the individual segments.
without interfering with
automatically forwards traffic that needs to go from
one segment to another.
network capacity is multiplied, while still maintaining
the same network cabling and adapter cards.
For Fast Ethernet networks, a switch is an effective
way of eliminating problems of chaining hubs beyond
the "two-repeater limit." A switch can be used to split
parts of the network into different collision domains,
making it possible to expand your Fast Ethernet
network beyond the 205-meter network diameter
limit for 100BASE-TX networks. Switches supporting
both traditional 10Mbps Ethernet and 100Mbps Fast
Ethernet are also ideal for bridging between existing
10Mbps networks and new 100Mbps networks.
The switch,
any other segments,
By doing this the total