Advertisement
28841/28842 Models 1755XC/1765XC Tradesman Vises
Drill four (4) 11/16" diameter holes.
Mount vise with four (4) 5/8" diameter cap bolts, 2-inches longer
than benchtop thickness. Use minimum Grade 5 bolts.
Secure with washers and nuts.
Align dashed line with edge of workbench. Tape paper
in place and transfer bolt hole centers to benchtop with
a center punch. Make sure underside of bolt hole
locations is clear of legs, brackets, drawers, etc.
mounting template
1/8 INCH
FOLD LINE
Advertisement
