Subscribe to Our Youtube Channel
Related Manuals for iLive V Series
Summary of Contents for iLive V Series
- Page 1 USER, OPERATING & INSTALLATION MANUAL V SERIES, PRO-LINE, PROFESSIONAL PLUS, NOSTALGIE & MAJESTIC SERIES FREESTANDING COOKERS (ALL MODELS, ALL COOKTOP OPTIONS & ALL OVEN TYPES) cod. EI33960020000EN IT18/2018 AU07/2021...
- Page 2 Congratulations, you are now the proud owner of an ILVE cooking appliance. Thank you for purchasing ILVE and welcome to the exciting world of cooking the ILVE way. This instruction manual has been specially created to inform you of the full range of features your ILVE appliance has to offer and serves as an introduction to the wonderful benefits of ILVE’s dynamic cooking systems.
- Page 3 OPEN 24 ILVE ACCESSORIES ONLINE SHOP For a wide range of Genuine ILVE accessories at the click of a button go to ilve.com.au...
-
Page 4: Table Of Contents
OPERATION / USER CONTENTS USER GUIDE INSTALLATION iWarranty INFORMATION - To be reminded to the user IMPORTANT SAFETY WARNINGS First operation of the oven INSTALLATION REGISTER YOUR WARRANTY ONLINE NOW INSTRUCTIONS FOR USE Installation of the cooker GO TO: ilve.com.au > support > product registration Room ventilation Using the hob Positioning of the appliance between furniture... -
Page 5: Important Safety Warnings
OPERATION / USER IMPORTANT SAFETY IMPORTANT SAFETY WARNINGS WARNINGS • This appliance is not intended for use by persons (including children) with • Before powering the appliance, check that the technical features shown on the reduced physical, sensory or mental capabilities, or lack of experience and data plate match those of the electrical system. - Page 6 OPERATION / USER IMPORTANT SAFETY IMPORTANT SAFETY WARNINGS WARNINGS • The use of any electrical appliances requires that a number of fundamental rules • Inflammable liquids, like alcohol or gasoline, must be kept away from the must be respected: appliance. 1.
- Page 7 OPERATION / USER IMPORTANT SAFETY IMPORTANT SAFETY WARNINGS WARNINGS - INDUCTION HOBS • Do not cover the burners or the hob with aluminium foil. • Do not use the hob as a working zone. • Do not use the appliance’s surface as a work top, sharp objects might scratch it. •...
-
Page 8: Instructions For Use
5 seconds so that upon its release the flame remains alight (in case of unsuccessful ignition repeat the operation). Symbol Function V Series ● ● ● maximum minimum index... - Page 9 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE - First system start-up of the hob – Use of a grill pan Recommended pans Gridiron If you want to use a grill pan a few things must be taken into account: according to burner size: - it is possible to preheat the grill pan on the burner’s maximum power for no more than...
- Page 10 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Positioning placement of the burners – Positioning placement of the burners Positioning of the BE CAREFUL: always check that the burners are properly positioned), with a uniform Positioning of the BE CAREFUL: always check that the burners are properly positioned, with a uniform burners flame that is not noisy.
- Page 11 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Use of the Coup feu – Use of the gas Tepanyaki plate COUP FEU Gas Tepanyaki Plate A = cooking area B = drip tray Fig. 14 Fig. 15 Fig. A Fig.
- Page 12 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Use of the inductive electric plate – Use of the inductive electric plate INDUCTION PLATE First use Clean the hob’s surfaces with a damp cloth. Switching on one A cooking area is turned on by turning the relative knob clockwise. On the hob’s display cooking area the set power level (from 1 to 9) appears.
- Page 13 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Use of the inductive electric plate – Use of the induction hob INDUCTION HOB Child-lock function The child-lock function is useful where children are present. However, the presence of an adult is advisable when the appliance is working. Activating the child-lock function, all cooking areas are off and cannot be accidentally A - ø145 - Cooking area ø...
- Page 14 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Use of the induction hob – Use of the induction hob Before the first use Clean your hob with a damp cloth, and then dry the surface thoroughly. Booster function The purpose of the booster function is to give more power to a determined area in order to reduce the necessary cooking time.
- Page 15 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Use of the induction hob – Use of the induction hob 4 zones models only The child-lock function is activated, with the knobs in position 0, by turning the controls Heating function 42°...
- Page 16 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE V SERIES (ELECTRIC OVEN) – Use of the induction hob – Use of the electric oven multifunction Using the ventilated Power management The purpose of the booster function is to temporarily increase power to a selected area electrical oven in order to reduce the necessary cooking time.
- Page 17 OPERATION / USER INSTRUCTIONS FOR USE V SERIES (ELECTRIC OVEN) INSTRUCTIONS FOR USE - PRO-LINE (ELECTRIC OVEN) – Use of the electric oven multifunction – Use of the electric oven multifunction – Functions list Pos. Symbol Function Description Cooking from underneath This is the most suitable mode to finish the food cooking, in particular confectionery (biscuits, meringues, S.
- Page 18 OPERATION / USER INSTRUCTIONS FOR USE - PRO-LINE (ELECTRIC OVEN) INSTRUCTIONS FOR USE - PRO-LINE (ELECTRIC OVEN) – Use of the electric oven multifunction – Use of the conventional electric oven – Functions list Pos. Symbol Function Description Choose one of the 4 cooking functions by turning the selector (S) and adjust the temperature (from 50˚C to 250˚C) with the thermostat (T).
- Page 19 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – MP & VP models with 5 button programmer – 5 button electronic programmer MP & VP Functions Cooking time • end of cooking • clock • timer • manual function Semi-automatic Select the duration function (button ) and set the time with the +/- buttons.
- Page 20 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – 5 button electronic programmer E3 (ELECTRIC OVEN) – 5 button electronic programmer E3 (ELECTRIC OVEN) – Functions list Pos. Symbol Function Cooking inspection If you need to inspect the food being cooked, you can open the oven door. In this case the lights come on and the cooking process stops.
- Page 21 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – 5 button electronic programmer E3 (ELECTRIC OVEN) – 5 button electronic programmer E3 (ELECTRIC OVEN) Button legend Set minute minder Appliance operation The first time the unit is switched on, the display shows a flashing clock that increases by one unit every minute.
- Page 22 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – 5 button electronic programmer E3 (ELECTRIC OVEN) – 5 button electronic programmer E3 (ELECTRIC OVEN) Inside food temperature (°C) Cooking over mode At the end of the cooking time the oven switches off all heating elements and the unit COOKING CHART Food Temperature (°C)
- Page 23 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Display TFT touch – Display TFT touch – – Icon legend Settings Home: display homepage. Home Break 3 options Allows you to proceed to the screen setting of the cavity Allows you to set the timer Light Start...
- Page 24 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Mod. static oven E3 with TFT touch – Mod. static oven E3 with TFT touch – Cooking process – Cooking function setting 11:48 11:48 Choose the cooking Set the cooking time and the programmed start function °C...
- Page 25 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – Mod. oven E3 with TFT touch – Mod. oven static with TFT touch – – Functions list Functions list Pizza cooking Upper & lower elements This function is particularly suitable for cooking pizza, focaccia and bread. The main source of heat is from the bottom heating Is the classical function of the electric oven and particularly adapted for cooking: pork chops, sausages, dried salt-cured cod, pot element that works in combination with the oven’s other resistances.
- Page 26 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – 5-button electronic programmer H3 (HYBRID OVEN) – 5-button electronic programmer H3 (HYBRID OVEN) Description Appliance operation At first control turning on, the display shows the flashing clock that increases by one unit every minute.
- Page 27 OPERATION / USER INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE – 5-button electronic programmer H3 (HYBRID OVEN) – 5-button electronic programmer H3 (HYBRID OVEN) – Functions list Pos./Pr. Symbol Function Light oven Cooking over mode At the end of the cooking time, the oven switches off all loads, a triple intermittent buzzer This function will turn the oven cavity light on.
-
Page 28: Cleaning And Maintenance
OPERATION / USER INSTRUCTIONS FOR USE CLEANING AND MAINTENANCE – Replacing the bulb turn-spit Slide the meat to be cooked onto the spit, blocking it with the special forks. Place the spit Procedure to follow Should the oven light not work, disconnect the appliance from the mains, remove the lamp protection glass and replace the bulb. - Page 29 OPERATION / USER CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE – Door removal – Cleaning the door and glasses (for more detailed information, go to www.ilve.com.au/cleaning Procedure to follow For ease of intensive cleaning it is useful to dismantle the door following these Procedure to follow The oven door is composed of 3 sheets of plate glass (two in some cases).
-
Page 30: Recommendations For Cleaning The Cooktop
OPERATION / USER CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE – Recommendations for cleaning the cooktop – Recommendations for cleaning the oven and the front panel ATTENTION: Before carrying out any cleaning operations, disconnect the appliance from the mains ATTENTION: Before carrying out any cleaning operations, disconnect the appliance from the mains and close the gas valve. - Page 31 OPERATION / USER CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE – Maintenance and cleaning of total black burners with – Maintenance and cleaning of total black burners with nano-technological coating nano-technological coating ATTENTION! ATTENTION: To preserve the quality of the nano coating please observe these guidelines. •...
-
Page 32: Problem Solving
OPERATION / USER PROBLEM SOLVING PROBLEM SOLVING – Glass ceramic malfunction – TFT display errors Problem Causes System errors The following errors are detected: The error code syntax is: “E YY X”, where: The appliance and the hob do not switch - The hob has not been properly connected to the electrical network. -
Page 33: Cooking Chart
OPERATION / USER PROBLEM SOLVING COOKING CHART – Child Lock – Fan oven (purely indicative values) How to resolve DISH TEMP. C° MIN. MEATS Symbol that represents the children lock Roast beef 170-180 40/50 Roast ox 40/60 170-190 Roast veal 160-180 65/90 Roast lamb... - Page 34 OPERATION / USER COOKING CHART COOKING CHART – Fan oven – Natural convection (purely indicative values) (purely indicative values) DISH MIN. TEMP. C° DISH TEMP. C° MIN. Bread 180-200 MEATS Pizza 10/20 Roast beef 60/80 Roast ox 50/60 Toast 185-195 Roast veal 60/80 Roast lamb...
- Page 35 INSTALLATION COOKING CHART IMPORTANT INFORMATION – Static oven - For the user (purely indicative values) Bakery ATTENTION THE INSTALLER MUST GIVE THE FOLLOWING INFORMATION TO THE USER - Verify the integrity of the appliance and the presence of all the product Bread documentation.
-
Page 36: Installation
INSTALLATION INSTALLATION INSTALLATION - Installation of the cooker - Installation of the cooker ATTENTION The appliance weighs more than 60 kg, therefore it must be moved of appropriate This appliance must be installed by an authorised person in accordance with this instruction manual, AS/NZS 5601 instruments. -
Page 37: How To Install The Fixing Bracket
INSTALLATION INSTALLATION INSTALLATION - Installation of the cooker - How to install the fixing bracket Positioning of the - The appliance can be installed singularly: class 1. Model: 60, 70, 80, 90 cm. - Unpack the cooker and mount the feet by adjusting the height. appliance between furniture - The appliance can be installed between two pieces of furniture: class 2/1. -
Page 38: Electrical Connections
INSTALLATION ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS - Groups of cooking - Cookers with induction top ATTENTION The instructions below are intended for the skilled technician who will install the cooker, ATTENTION The appliance is supplied without a plug: The power supply cable should not reach regulate it and perform technical maintenance and who will ensure that these operations above 50°C ambient are carried out in the most correct way possible, in compliance with the regulations in... -
Page 39: Adjustment
INSTALLATION ADJUSTMENT ADJUSTMENT - Replacement of the injectors for models - Replacement of the injectors for models “K” “V” Series Procedure: • Remove the grill and the burners from the hob.• SR – R – P : Procedure • Remove the grill and the burners from the hob. SR - R - P SR –... -
Page 40: Adjustments Minimum Gas Flow
INSTALLATION ADJUSTMENT ADJUSTMENTS - Adjustments minimum GAS flow Burner Chart Fig. C2... -
Page 41: Wiring Diagram
INSTALLATION WIRING DIAGRAM WIRING DIAGRAM - Key Black ” ” oven thermostat Circular heating element HOB GAS Brown ” ” programmer/timer Barbecue heating element ” ” grill Fryer heating element White ” ” el. hotplate Energy regulator Yellow ” ” frame Oven warning light Yellow-green ”... - Page 42 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM P09I...E3 INDUCTION HOB AREA 5 INDUCTION HOB AREA 6 INDUCTION HOB AREA 4...
- Page 43 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM P (06-07-30”-08-09)...E3 P (06-07-30”-08-09)...H3 K/L (06-09)...MP P (06-07-30”-08-09)...G3...
- Page 44 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM M(07-30”-09)...E3 M09I..E3 M09I..H3 M(07-30”-09)...H3...
- Page 45 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM KD/LD (09-10)...MP M12I...H3 LD (09-10)...G3 M12...E3...
- Page 46 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM M12...H3 M15...E3 M15...H3 M12I...E3...
- Page 47 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM WIRING DIAGRAM WIRING DIAGRAM MD10...E3 MD10I...E3 MD10I...H3 MD10...H3...
- Page 48 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM MD12I...E3 MD12...E3 MD12...H3 MD12I...H3...
- Page 49 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM WIRING DIAGRAM WIRING DIAGRAM P12...IE3 P12...E3 P12...H3 P12...IH3...
- Page 50 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM PD(09/10)I...E3 P15/PD12...E3 P15/PD12...H3 PD(09/10)...E3...
- Page 51 INSTALLATION WIRING DIAGRAM WIRING DIAGRAM PD12I...E3 PD/LD(09-10)...H3 PD/LD(09-10)I...H3 PD12I...H3...
- Page 52 INSTALLATION WIRING DIAGRAM INSTALLATION & CONNECTION MAJESTIC Majestic - Rear View Majestic - Side (except M30) Majestic - Side (only M30) Majestic - M07 Majestic - M30 Majestic - M09 1000 1216 Majestic - M10 Majestic - M12 1511 Majestic - M15...
- Page 53 INSTALLATION & CONNECTION WARRANTY PROFESSIONAL PLUS, PRO-LINE & V LINE Eurolinx Pty Limited A.B.N. 50 001 473 347 arising in the manufacture of the ILVE product, trading as ILVE (“ILVE”) including but not limited to: Office: (a) damage through misuse (including failure 48-50 Moore Street, Leichhardt N.S.W 2040 to maintain, service or use with proper care), Post:...
-
Page 54: Warranty
LUXURY KITCHEN APPLIANCES WARRANTY 5. Proof of Purchase (i) replacing or repairing the defective part of the ILVE product; Customers must retain proof of purchase in order to be eligible to make a warranty claim in respect (ii) paying the cost of replacing or repairing the of an ILVE product.
Need help?
Do you have a question about the V Series and is the answer not in the manual?
Questions and answers