Advertisement
Arrows
B Post
• Fit the A post onto the B post, as shown.
• Insert five
3
/
" screws through the A post and into the
4
B post. Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Check to be sure that the scorekeeper arrows on the
B post scoreboard move up and down. If they do not,
remove the screws and the A post and make sure that
the net is not tangled. Re-assemble the A post to the
B post.
B Post
A Post
C Base Post
• Place the C base post on a flat surface.
• Insert the peg on the C base post through the hole in the
A post.
• Insert a spring, washer and a 1
hole in the A post and onto the peg on the C base post.
Tighten the screw with a Phillips screwdriver. Make sure
the spring is fully inserted.
• Repeat this procedure to attach the D base post to the
B post.
B Post
• After assembling the D base post, lift it up so that it is
now at a right angle to the B post.
A Post
Net
A Post
Hole
Peg
Screw
Spring
Washer
C Base Post
1
/
" screw through the
4
D Base Post
Left
Pegs
❶
IMPORTANT! Aligning and attaching the bottom of the
net to the frame requires a different procedure than
attaching the top of the net to the frame. Please read the
following instructions carefully.
• Locate the four marks on the bottom center of the net.
• Place the net onto the C base post so that the
between the left pegs and the
right pegs.
❹ ˜
• Fold the net so that it fits in the channels on the C base
post. Make sure the net remains in the correct position
—
(
mark between left pegs and
right pegs).
D Base Post
• Pull the D base post down to cover the pegs on the
C base post.
• Insert four
3
/
" screws through the D base post and into
4
the C base post. Tighten the screws with a Phillips screw-
driver. Do not over-tighten.
3
Right Pegs
— ˜
˜
mark is between the
Channels
— ❶
Pegs
˜
mark between
Pegs
C Base Post
❹
—
mark is
Advertisement
