The joint working of Silenplus pumps and the Contents Warning for the safety of people and property 11 ControlSystem enables full control of the pump 1. General points ........... 12 functions just by operating the filter valve. 2. Handling ............. 12 ®...
The 6 valve positions must be indicated to the sys- 3.3 ControlSystem installation tem. For this purpose, use the following calibration Fit the ControlSystem to the multiport filter valve process (See Figure 3): control. (See figure 1) 1 - Move the valve control to position 4. ...
F key. stops automatically to make the valve movement 5.4 System status easier. Espa offers installers and users the EspaEvopool In any intermediate position, the pump remains application for monitoring the system status and in- stopped.
This product or parts of it must be disposed of in an environmentally sound way, use the waste collection service. If this is not possible, contact the nearest ESPA service workshop.
9. LED INDICATORS In Silenplus pump The possible LED combinations and their meanings are: 0 = LED OFF 1 = LED ON 2 = LED flashing slowly 3 = LED flashing quickly AUTO/ BACKWASH FILTRATION MANUAL/ Equipment status Plus Plus FAULT Functions Filtration Plus function in Auto mode.
Need help?
Do you have a question about the evopool Silenplus and is the answer not in the manual?
Questions and answers