Atomos Ronin Quick Start Manual

Atomos Ronin ~ QuickStart Guide
Download the full Ronin User Manual
www.atomos.com/support
Activate Avid DNxHD
www.atomos.com/activation
Contents checklist:
Ronin unit
❏
2 x 2-Cell Batteries
❏
NP-570 Compatible 2600mAh
Master Caddy Docking Station
❏
USB 2.0/3.0, Firewire
1 x D-Tap Adaptor
❏
1 x IEC Power Cable
❏
5 x Master Caddies + screws
❏
QuickStart Guide
❏

Getting started:

Preparing for battery operation:
We recommend that you charge new batteries before using them.
Ronin has a built-in battery charger that will charge two batteries
attached to the rear battery plate.
Charging occurs automatically. Battery level can be seen and checked
using the Ronin touchscreen Battery Level menu screen. Please refer to
the Ronin User Manual for more information.
Charging batteries
AC Power connector and switch
Important
Please read the following page ' AC power operation' and 'DC power
operation' BEFORE connecting AC power or attaching batteries.
if required
®
800
®
Batteries charge automatically
when AC power is connected
Register now to extend your warranty
to 3 years from date of purchase
www.atomos.com/registration
Also required:
HDD/SSD
2.5 inch Hard Disk Drive [HDD]
or Solid State Drive [SSD].
For recommendations refer to:
> www.atomos.com/support
Assemble Master Caddy:
Insert your Hard Disk [HDD] or Solid State Drive [SSD] into the Master
Caddy as shown. Prior to assembling the Master Caddy Align all screw
holes on "all three pieces"of the Master Caddy, Insert the screws and
tighten screws last in order to successfully assemble the Master Caddy
Unit completely.
Handle the HDD or SSD with care
Touch screw holes or metal shell first. Avoid contact with circuit board and
connectors. Refer to manual if unfamiliar with handling ESD sensitive
devices.
1
Important: Insert screws last and DO NOT over-tighten the screws or
proper alignment of the Master Caddy can not be guaranteed.
Once your drive is inserted into the caddy, format it in your Ronin
Recorder by selecting the BLUE arrow
Remaining, Press Format HDD/SSD and follow the on-screen
instructions. For more information refer to the User Manual.
2
next to Recording Time