Summary of Contents for Campbell Advisor Guide Pedestrian Signal
Page 1
Advisor Guide Pedestrian Signal (AGPS) User’s Manual 906-0001 ● Revision E February 4, 2015...
Page 2
Campbell Company. The information furnished herein is believed to be accurate and reliable. However, no responsibility is assumed by Campbell Company for its use, or for any infringements of patents or other rights of third parties resulting from its use.
System. Additional Information • See the AGPS Installation Guide for installation instructions. • Reference the Campbell Company Intersection Worksheet for location specific information. • Set the AGPS Installation Quick Guide for a brief graphical installation guide. • See the Base Station Mounting Template for an easy to use hole pattern for mounting APBs.
Each Advisor Guide Pedestrian Signal is configured at the factory based on the documentation provided by the customer. Configuring the AGPS is done using the provided AGPS Utility and a USB cable so the customer can reconfigure the system as needed.
Campbell Company uses a .wav file format for its audio messaging and recommends this format if you decide to create your own. The utility will accept any recording sample of bit rate, however for optimal recording performance contact Campbell Company’s technical support for tips and...
Set PC Time – Sets time from PC Set Time – Sets time manually Firmware Upgrades To download the latest utility versions and firmware contact Campbell Company for an electronic copy. Use the Misc tab (figure 6) Open Hex – Select Firmware File, flash firmware rev...
Need help?
Do you have a question about the Advisor Guide Pedestrian Signal and is the answer not in the manual?
Questions and answers