Continental Electric CE22811 User Manual

Hand
Mixer
User Manual
Model:
CE22811
IMPORTANT SAFEGUARDS
When using electrical appliances especially when children are present, basic
safety precautions should always be followed, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against electrical shock, do not submerge the mixer or allow AC cord to
come in contact with water or other liquids.
3. This appliance should not be used by children, and care should be taken when used
near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and before
cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions, or has been dropped or damaged in any manner. Return appliance to
the nearest authorized service facility for examination, repair or electrical or mechani-
cal adjustment.
7. The use of attachments not recommended or sold by the appliance manufacturer
may cause fire, electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10. Do not let cord contact hot surfaces, including the stove.
11 . Do not place hand mixer on or near a hot gas or electric burner.
12. Keep hands, hair, clothing as well as spatulas and other utensils away from beaters
and out of container while mixing to reduce the risk of severe injury to persons or
damage to the unit. A scraper may be used, but must be used ONLY when the unit is
not running and unplugged.
13. Remove beaters from mixer before washing.
14. Do not use hand mixer for other than intended use.
15. HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
LINE CORD SAFETY TIPS
1. Never pull or yank on cord or appliance.
2. To insert plug, grasp firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove from outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are found,
this indicates that the appliance should be serviced and the line cord replaced.
5. Never wrap the cord tightly around the appliance, as this could place undue stress on
the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.