Page 2
These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: SK0015 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
Page 3
surface for installation must be at least 10mm thick. gned to fit into standard sized office desk cut-outs of 60-80mm without the need to cut ig. 1) able hole in the mounting surface as per the cut-out details (see Fig. 1) Fig.
Page 4
• Connect to the plug-in adaptor, plug into a socket and check for correct operation • This product is designed for charging portable USB devices only and contains a short circuit and overload protection feature. If there is no power from the USB socket unplug the connected device.
Page 5
ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML...
Page 6
The product complies with all essential requirements of the directives. Scott Brewer Catherine Connolly Technical Manager ML Accessories Ltd. Unit E Chiltern Park, Boscombe Road, Dunstable. Bedfordshire, LU5 4LT This declaration becomes invalid if technical or operational modifications are introduced without ML Accessories Ltd. written consent.
Page 7
The products comply with all essential requirements of the directives. Scott Brewer Catherine Connolly Head of Technical ML Accessories Ltd. Unit E Chiltern Park, Boscombe Road, Dunstable. Bedfordshire, LU5 4LT This declaration becomes invalid if technical or operational modifications are introduced without ML Accessories Ltd. written consent.
Page 8
Supplied By: (UK) Manufacturer ML Accessories Ltd, Unit E Chiltern Park, Boscombe Road, Dunstable LU5 4LT, www.mlaccessories.co.uk (EU) Authorised Representative nnuks Holding GmbH, Niederkasseler Lohweg 18, 40547 Düsseldorf, Germany, Email: eprel@nnuks.com DCJUN22_V1...
Need help?
Do you have a question about the SK0015 and is the answer not in the manual?
Questions and answers