Related Manuals for ML Accessories Knightsbridge SKRECFC
Summary of Contents for ML Accessories Knightsbridge SKRECFC
- Page 3 in walls in walls If the plug is removed then the overcurrent protection offered by the plug must be reinstated by If the plug is removed then the overcurrent protection offered by the plug must be reinstated by terminating into a fused connection unit or similar, with a 13A fuse terminating into a fused connection unit or similar, with a 13A fuse Please note the IP (Ingress Protection) rating of this product when deciding the location for installation Please note the IP (Ingress Protection) rating of this product when deciding the location for installation...
- Page 4 Install a timber stud or batten at a depth of 60mm to allow room for the flex (see Fig. 3); or at a depth of 45mm if a cut-out in the batten is made for the flex Fig. 3 If mounting into masonry, cut a hole 323 x 65mm and 45mm deep, with an extra channel for the flex...
Need help?
Do you have a question about the Knightsbridge SKRECFC and is the answer not in the manual?
Questions and answers