Advertisement
Owner's Record
The model and serial numbers are located on the
rear of the subwoofer.
Record the serial numbers in the space provided
below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. SA-SW5
Serial No.
About compatible
models for the
subwoofer
The SA-SW5 subwoofer works only with the specified
model. For information about compatible models,
visit Sony's website.
In these Operating Instructions, the operations are
described for the subwoofer used with the
compatible model HT-A7000 or HT-A9.
Parts and Controls
Front
Power indicator
– Flashes slowly (green): The subwoofer is
attempting to automatically connect to a
compatible model.
– Lights up (green): The subwoofer is connected to
a compatible model.
– Flashes twice repeatedly (green): The subwoofer
is attempting to manually connect to a
compatible model.
– Flashes/lights up (amber): The software is
updating.
– Lights up (red): The subwoofer is in standby
mode.
– Turns off: The subwoofer is turned off.
Slit
Note
The brightness of the power indicator syncs with the
DIMMER settings of a compatible model.
Rear
(power) button
LINK button
AC inlet
Installation
The following illustration is the installation example
to use the subwoofer with the compatible model
HT-A7000 and optional rear speakers.
SA-SW5
1
Install the subwoofer in the place that you
want.
You can install the subwoofer in the place that
you want because the output sound from it has
no directivity.
The above illustration is the example for
installation of the subwoofer.
Note
Install the subwoofer with the slit on the bottom, as
shown in the "Parts and Controls" illustration. The
subwoofer is not designed to be installed in a
different orientation.
Connection
Tip
You can connect the optional rear speaker with a
compatible model in the following way when
installing it too.
1
Turn on a compatible model.
Advertisement
