RotoSpa DUO S080 Quick Start Manual
  1. Manuals
  2. Brands
  3. RotoSpa Manuals
  4. Hot Tub
  5. Orbis
  6. Quick start manual

RotoSpa DUO S080 Quick Start Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

STEP 1
DO NOT connect
to power.
Turn on all jets by turning anti-clockwise.
Turn off all air control valves.
QUICK GUIDE
SETTING UP YOUR ROTOSPA
ON
1
OFF

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DUO S080 and is the answer not in the manual?

Questions and answers

Related Manuals for RotoSpa DUO S080

Summary of Contents for RotoSpa DUO S080

  • Page 1 QUICK GUIDE SETTING UP YOUR ROTOSPA STEP 1 DO NOT connect to power. Turn on all jets by turning anti-clockwise. Turn off all air control valves.
  • Page 2 STEP 2 FILLING Add water via filter housing. DUO SPA S080 & S240 QUATRO & ORBIS SPAS DURA SPA S160 & S380...

  • Page 3: Installing The Filter Cartridge

    STEP 2 FILLING Stop when fill line reached. DUO SPA S080 & S240 Fill the spa to the top of this cut out in the filter housing front plate. Insert filter cartridge followed by flow plate. Finally, the filter basket sits on top of the flow plate.
  • Page 4 STEP 3 POWER Connect to power using RCD. The control panel will illuminate & system will purge. STEP 4 HEATING The system will automatically begin to heat the water to default temperature of 38 degrees. Please note water heating to 37 degrees could take up to 12 hours.

  • Page 5: Control Pad

    STEP 5 CONTROL PAD Familiarise yourself with the panel. DISPLAY MODE ICONS Water temperature UP button Set temperature Clock DOWN button OK button MENU ICONS Light ON/OFF Sleep timer menu icon Light menu icon Pump A Blower menu icon Auxiliary AUTO mode LED STATUS ICONS Keypad locked...

  • Page 6: Water Care

    STEP 6 WATER CARE Do not enter the spa until these steps are followed. We recommend sanitising the spa with either product to establish baseline. Non-Chlorine if Bromine is to be used. Granular if Chlorine is your choice. When using RotoSpas chemical you will find the dosage instructions on the container.

  • Page 7: Water Testing

    STEP 7 WATER TESTING Using the test kit in your starter pack take a sample of water & add testing tablets. DPD No.1 Phenol Red...
  • Page 8 Bromine 4.0 - 6.0 ppm 7.2 - 7.6 Your RotoSpa Installation engineer will test your main water’s alkalinity and advise you Total Alkalinity on the best chemical treatment. The perfect total Alkalinity is in between 80 - 150 ppm. * ppm = parts per million We recommend always aiming for 7.2 on the pH scale, as this is...

This manual is also suitable for:

Duo s240QuatroOrbisDura s160Dura s380

Table of Contents