Advertisement
Quick Links
SNAP-N'-GLIDE
CORDLESS ROLLER SHADE
PREPARATION
1
Check the Hardware
Head Rail x 1
A
Screw
D
23"-39" = 4
48 x 72 = 6
2
Gather other necessary tools
INSTALLATION
1
Mark where the Mounting Brackets
2 Mounting Brackets should be positioned 4 inches from the left and right edges of the blinds. Use a
steel tape measure and a level to ensure accuracy.
4in
2
Drill 2 screws
Cord x 1
Mounting
B
C
Bracket
3
23"-39" = 2
48 x 72 = 3
Place the back groove of the headrail
Anchor
E
23"-39" = 4
headrail in and push the front headrail(facing you) upward until the front groove to clip into the mounting bracket.
48 x 72 = 6
Measuring
should be installed.
C
C
Wall Mount
Install Ceiling Mounts Brackets to ceiling
for each Mounting brackets
D
C
Wall Mount
Mount Headrails to the ceiling
into the back mounting bracket
A
Wall Mount
Ceiling Mount
4in
4in
C
OR
C
Ceiling Mount
to the wall or ceiling.
C
OR
C
Ceiling Mount
(facing the window). Then push the back
C
4in
C
C
D
D
Advertisement
Related Manuals for CHICOLOGY SNAP-N'-GLIDE
Summary of Contents for CHICOLOGY SNAP-N'-GLIDE
- Page 1 INSTALLATION Measuring SNAP-N’-GLIDE Mark where the Mounting Brackets should be installed. CORDLESS ROLLER SHADE 2 Mounting Brackets should be positioned 4 inches from the left and right edges of the blinds. Use a steel tape measure and a level to ensure accuracy. Wall Mount Ceiling Mount Install Ceiling Mounts Brackets to ceiling...
- Page 2 14 calendar days or else you may be denied for your damaged product. Obligations to the consumer : The obligations of Chicology are limited to the repair or replacements of parts or products found to be defective. Chicology will determine if the product is defective or not and may replace the product.
Need help?
Do you have a question about the SNAP-N'-GLIDE and is the answer not in the manual?
Questions and answers
How do I release bracket on my Chicology Roman blind to replace just the blind to another color
To release the bracket on your Chicology SNAP-N'-GLIDE Roman blind, follow these steps:
1. Locate the mounting brackets that hold the headrail in place.
2. Identify the back groove of the headrail where it clips into the bracket.
3. Push the front of the headrail upward to release the front groove from the bracket.
4. Tilt the headrail slightly and pull it out from the back groove of the bracket.
5. Once removed, you can replace the blind with another color by securing the new headrail into the mounting brackets.
Ensure the new blind is properly aligned and clips securely into place.
This answer is automatically generated