English (Original Instructions) - MAC TOOLS MPF59038 Original Instructions Manual

3/8" TO 1/2" HIGH-POWERED AIR RATCHET
MPF59038
The Mac Tools™ MPF59038 and are precision-built tools,
designed for professionals for high torque assembly and
disassembly of threaded fasteners. These tools will deliver
efficient , dependable service when used correctly and with
care. As with any fine power tool, for best performance the
manufacturer's instructions must be followed. Please study this
manual before operating the tool and understand the safety
warnings and instructions . The instructions on installation,
operation and maintenance should be read carefully , and the
manuals kept for reference. nOtE: Additional safety measures
may be required because of your particular application of the
tool. Contact your Mac Tools representative or distributor with
any questions concerning the tool and its use.
Technical Data
Square drive
Maximum torque (reverse)
Free speed @ 90 PSI (6.2 Bar)
Net weight
Exhaust type
Average air consumption free speed
Average air consumption at load
Air intlet size
Recommended hose size
Maximum air pressure
Noise values and vibration values (triax vector sum) according to
EN ISO 11148-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
EC‑Declaration of Conformity
Machinery Directive
3/8" to 1/2" HIGH-POWERED AIR RATCHET
MPF59038
MAC TOOLS declares that these products described under
Technical Data are in compliance with: EN ISO 11148-6:2012.
These products also comply with Directive 2006/42/EC. For
more information, please contact MAC TOOLS at the following
address or refer to the back of the manual.
MPF59038
3/8" or 1/2"
80 Ft. lbs (108 Nm)
300 rpm
3.5 lbs (1.57 kg)
Front
35 SCFM (17 L/s)
4.9 CFM (2.3 L/s)
35 SCFM (17 L/s)
4.9 CFM (2.3 L/s)
1/4" NPT(F)
3/8" (10 mm)
90 PSI (6.2 Bar)
91
dB(A)
102
dB(A)
3
dB(A)
3.0
m/s 2
2
m/s 1.5
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of MAC TOOLS.
Markus Rompel
Vice-President Engineering, PTE-Europe
MAC TOOLS, Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
09.08.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
3/8" to 1/2" HIGH-POWERED AIR RATCHET
MPF59038
MAC TOOLS declares that these products described under
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN ISO 11148-6:2012.
For more information, please contact MAC TOOLS at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of MAC TOOLS.
Karl Evans
Vice President Professional Power Tools EANZ GTS
MAC TOOLS UK, 270 Bath Road, Slough
SL1 4DX
England
09.08.2021
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols
and words to alert you to hazardous situations and your risk of
personal injury or property damage.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
EnGlIsh
15