MOKENEYE DD02Z Owner's Manual

12v cordless drill

Advertisement

Quick Links

Owner's Manual
VERSION: DD02Z-EN-02
Model
DD02Z
12V CORDLESS DRILL / DRIVER
NOTICE: Get 1-year extended warranty by scanning the QR code to REGISTER.
To reduce the risk of injury, the user must read and understand the
WARNING:
Owner
's Manual before using this product. Save these instructions for future reference.
support@mokeneye.com
For Customer Service
www.facebook.com/MokeneyeTools

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DD02Z and is the answer not in the manual?

Questions and answers

Summary of Contents for MOKENEYE DD02Z

  • Page 1 Owner’s Manual VERSION: DD02Z-EN-02 Model DD02Z 12V CORDLESS DRILL / DRIVER NOTICE: Get 1-year extended warranty by scanning the QR code to REGISTER. To reduce the risk of injury, the user must read and understand the WARNING: Owner 's Manual before using this product. Save these instructions for future reference.
  • Page 2: Table Of Contents

    WORK AREA SAFETY TABLE OF CONTENTS Keep work area clean and well lit. Cluttered or GENERAL SAFETY WARNINGS ....2 dark areas invite accidents. Do not operate power tools in explosive SAFETY WARNINGS FOR DRILL ....3 atmospheres, such as in the presence of flammable liquids, gases or dust.
  • Page 3: Safety Warnings For Drill

    attached to a rotating part of the power tool BATTERY TOOL USE AND CARE may result in personal injury. Recharge only with the charger specified by the Do not overreach. Keep proper footing and manufacturer. A charger that is suitable for one balance at all times.
  • Page 4: Symbols

    resulting in personal injury. operation, always wear safety goggles or safety glasses with side shields and a full-face shield when Always start drilling at low speed and with the needed. We recommend a Wide Vision Safety Mask bit tip in contact with the workpiece. for use over eyeglasses or standard safety glasses At higher speeds, the bit is likely to bend if with side shields.
  • Page 5: Get To Know Your Drill

    GET TO KNOW YOUR DRILL 12V CORDLESS DRILL / DRIVER CHUCK JAWS FRONT CHUCK REAR CHUCK TORQUE ADJUSTMENT RING TWO SPEED GEARBOX SWITCH LED WORKLIGHT VARIABLE SPEED TRIGGER SWITCH BATTERY PACK VENTILATION OPENINGS 10) DIRECTION OF ROTATION (FORWARD/CENTER- LOCK/REVERSE) SELECTOR 11) SOFT GRIP 12) BATTERY RELEASE BUTTON...
  • Page 6 DRILL HANDLE BATTERY PACK FORWARD CENTER-LOCK REVERSE VARIABLE-SPEED TRIGGER SWITCH...
  • Page 7 TORQUE-ADJUSTMENT RING TWO-SPEED TORQUE TORQUE GEARBOX SWITCH SETTINGS INDICATOR FRONT CHUCK REAR CHUCK...
  • Page 8: Operating Instructions

    This cordless tool must be used only with the left or right. battery packs and charger listed below: 1.3Ah B121303MZ VARIABLE-SPEED TRIGGER SWITCH MOKENEYE 1.5Ah B121505MZ Battery Pack See Fig. 4 2.0Ah B122010MZ...
  • Page 9 clockwise direction as viewed from the chuck TORQUE-ADJUSTMENT RING end. See Fig. 6 To remove the bit Your tool features 25+1 clutch settings. Output torque will increase as the torque-adjustment ring is a. Grasp the rear half of the chuck with one hand rotated from 1 to 25.
  • Page 10: Maintenance

    We recommend that all tool service be performed the life of the bit and increase the drilling action. by a MOKENEYE Factory Service Center or b. Begin drilling at a very low speed to prevent the Authorized MOKENEYE Service Station.
  • Page 11: Trouble Shooting

    LIMITED WARRANTY 1 YEAR LIMITED WARRANTY- LEGAL MOKENEYE warrants to the original purchaser only, that all MOKENEYE consumer POWER TOOLS will be free from defects in material or workmanship for a period of one years from date of purchase. BATTERIES AND CHARGERS are warranted for 1 years.

Table of Contents