Hotone Ampero Control Quick Start Manual

折起朝外
技术要求：
157g铜板纸，273*124mm，四色印刷，覆哑膜，二折页
Screen Display
Bluetooth MIDI
This
indicates
a

Bluetooth
not

PC
message
(PC

connected
16)
has
been
sent
PC CC PC CC PC CC PC CC
This
indicates
unit
bank

This
indicates
a
CC

Bluetooth


message
(CC
112)
change

connected
(bank
00
to
bank
01)
has
been
sent
PC CC PC CC PC CC
The Bluetooth indicator (the dot shown
above) will flash when Ampero Control
is in Bluetooth Pair Mode (hold FS 2+3).
Getting Started
1. Turn on the Bluetooth switch on your mobile device, then turn
Bank
on your Ampero Control and launch the app.
2. Login your account (optional).
3. Press and hold FS 2+3 on your Ampero Control to enable
PC CC Bluetooth P air Mode . A dot will f lash on the bottom right
corner on the screen of your unit to indicate pairing status on.
4. When your Ampero Control appears listed on the startup
page, select and tap the "Connect To The Selected Device"
button on the screen. If search failed, you can retry searching
by manually tap "Search Again" button.
Notes: 1. You can enter offline mode if
no device is found.
2. Ampero Control can only be edited
by one device at a time. To use other
devices, tap "Settings" icon on lower
right corner of the screen, find
"Connection Status" and enter, then
tap "Disconnect". Connect another
device when finished.
3. The default device name is Ampero
Control. You can customize your
device name if needed.