Page 1
SC360 System Controller Installation Guide Model TSYS2C60A2VVU APPLY PASSWORD LABEL HERE With Link technology ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES IMPORTANT — This Document is customer property and is to remain with this unit.
8. Button/LED Functions ......10 3. General Information ........3 9. Offline Over The Air Upgrades ....11 What’s in the Box? ......... 3 10. SC360 Notices ........14 Accessories ........... 3 Software Updates .......... 3 4. Trane & American Standard Link Systems .
• 2 ft. Harness An internet connection is required for software • 6 ft. Harness updates. When the SC360 is connected to the • Mounting Kit Internet, software updates will occur automatically • Duct Sensor Kit and do not require user intervention.
Link Systems ® ® Installation. Trane and American Standard Technical Advantages • Link systems are built to be “plug and play”. • Self-configuring system on startup Once you’ve connected the outdoor unit, • Automated verification simplifies charging indoor unit, SC360, and UX360, turn on the and airflow procedures, and automatically system.
• In order for the SC360 to be assigned as an the SC360 to the right or left side of the UX360. indoor temperature and humidity sensor, it must be installed in a controlled space.
To take advantage of the full range of features anchors. Make sure all wires extend through on the SC360, it should be connected to the the Sub-base. Internet using a wireless connection. If the SC360 will be connected to the Internet...
Installation Guide 6. Field Wiring Connection Diagram Options COMMUNICATING INDOOR AND OUTDOOR DISTRIBUTION SYSTEM BOARD CONTROLLER COMMUNICATING COMMUNICATING (SC360) (4x or 8x) INDOOR UNIT OUTDOOR UNIT THERMOSTAT (UX360) WIRE COLORS WHITE GREEN BLUE SYSTEM DISTRIBUTION BOARD CONTROLLER COMMUNICATING (4x or 8x)
Outdoor Unit (UX360) System Controller (SC360) • 24 VAC is required to power up the SC360 and UX360 • 24 VAC is required at the outdoor unit for Smart Charge automatic charging • 24 VAC is required at the outdoor unit if Load Shed is desired...
When the SC360 is On Solid ~ 6 seconds connected to the Sub-base, OFF ~ 4-5 seconds the SC360 initiates a 70-90 Slow Flashing: ~60 seconds second power up sequence. OFF -> LED remains OFF continuously once power up sequence has completed...
9. Offline Over The Air Upgrades There may be situations during a repair or otherwise where one or more pieces of the Link system are not on the same software version, or the system does not have access to the internet and an upgrade is needed.
Page 12
Step 5: Press and hold the button on the right- device, you can now push that update hand side of the System Controller for to the Link system. at least 6 seconds. NOTE: You will need the Mac ID and...
Page 13
SC360 System Controller Step 10: Push update to system and wait for verification that the download was successful. Once complete, the technician’s job is done. NOTE: This system update will take several hours to complete once the System Controller has it.
Installation Guide 10. SC360 Notices TSYS2C60A2VVU FCC Notice IC Notice Contains Transmitter Module IC ID: 1846A-CCIMX6UL Contains Transmitter Module FCC ID: MCQ-CCIMX6UL Contains Transmitter Module IC ID: 11263A-ZM5304 Contains Transmitter Module FCC ID: D87-ZM5304-U This device complies with part 15 of the FCC Rules.
Page 15
SC360 System Controller 18-HD95D1-1C-EN...
Page 16
About Trane and American Standard Heating and Air Conditioning Trane and American Standard create comfortable, energy efficient indoor environments for residential applications. For more information, please visit www.trane.com or www.americanstandardair.com The manufacturer has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.