DHP DL8877B3 Instruction Manual page 13

WARNINGS:
* Any mattress used in this crib must be at least 27-1/4 inches by 51-5/8 inches
(69cm by 131cm) with a thickness not exceeding 6 inches (15cm).
* The day bed is not intended for children under 15 months of age or over 50
pounds (22.7 kgs).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB
Detach the front panel (B) from the side panels (A&C) with the Allen Key (12).
STEP 1:
If mattress support (E) is not in the lowest position, unscrew bolts (5) from side panels
STEP 2:
(A&C) and move it to the lowest position.
Secure day bed rail (D) to side panels (A & C) with plastic block (4), bolts (1),
STEP 3:
spring washer (7), wood dowels (3) and the Allen key (12).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM SCRATCH
Follow steps 1 to 3 of the crib assembly instruction.
STEP 1:
Attach day bed rail (D) to side panels (A&C) with plastic block (2), bolts (2), wood
STEP 2:
dowels (2) and the Allen key (12).
3-IN-1 STORAGE CRIB
DL8877B3