Summary of Contents for DHP Baby Knightly DA1503B4-E
Page 1
INSTRUCTION MANUAL Model No: DA1503B4-E (Espresso) DA1503B4-G (Driftwood) MONTANA 2.0 4 IN 1 CRIB UPC CODE: 0-65857-17045-0 (Espresso) 0-65857-17048-1 (Driftwood) SKU Number 39119020 (Espresso) 39119044 (Driftwood) NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) _____________________________________...
Page 2
CALL 1-800-267-1739 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. DHP Consumer Services 12345 Albert-Hudon Boulevard, Suite 100 Montreal, Quebec Canada H1G 3L1 cs@dhpfurniture.com...
NOTES Ensure all parts and components are present before beginning assembly. Assemble on a soft, smooth surface to prevent damage to product finish. Phillips head screw driver is not included. DO NOT use power tools. CAUTIONS: Adult assembly required. Assembly will require two people. Estimated assembly time: 30 minutes.
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G HARDWARE LIST Ø 1/4" X 15mm X 35mm Ø 1/4" X 15mm X 40mm BOLT BOLT 6 PCS 8 PCS Ø 1/4" X 15mm X 15mm MATTRESS SUPPORT BOLT ALLEN KEY 16 PCS 1 PC Ø...
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G PARTS LIST HEADBOARD LEFT SIDE PANEL RIGHT SIDE PANEL 1 PC 1 PC 1 PC FRONT PANEL BOTTOM RAIL MATTRESS SUPPORT 1 PC 1 PC 1 PC...
Page 6
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G CRIB ASSEMBLY INSTRUCTION NOTE: When inserting bolts, turn clockwise until tight. Then loosen 1/2 - 3/4 of a turn. After crib is completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
Page 7
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G STEP 1 Attach the left side panel (B) and right side panel (C) to the headboard (A) with bolts (1) and spring washers (6). Use Allen Key (4) to tighten all bolts.
Page 8
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G STEP 2 Attach mattress support (F) to headboard (A) and side panels (B & C) with mattress support bolts (3) and spring washers (5). Use Allen key (4) to tighten the bolts (3). CORRECT CORRECT "THIS SIDE UP"...
Page 9
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G STEP 3 Attach front panel (D) to the left and right side panels (B) & (C) with bolts (2) and spring washers (6) as shown. Use Allen key (4) to tighten all bolts.
Page 10
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G WARNINGS: * ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM). * The toddler bed or day bed is not intended for children under 15 months of age or over 50 lbs (22.7 kgs).
Page 11
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G FULL SIZE BED ASSEMBLY INSTRUCTION (HEADBOARD ONLY) NOTE: FULL SIZE CONVERSION RAILS ARE NOT INCLUDED. DIAGRAMS ARE FOR REFERENCE ONLY. BED RAILS MAY DIFFER FROM ILLUSTRATION. STEP 1 Attach a metal bedframe (not included) to the headboard (A) to convert your crib into a full size bed using the headboard only.
Page 12
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G FULL SIZE BED ASSEMBLY INSTRUCTION (HEADBOARD AND FOOTBOARD) NOTE: FULL SIZE CONVERSION RAILS ARE NOT INCLUDED. DIAGRAMS ARE FOR REFERENCE ONLY. BED RAILS MAY DIFFER FROM ILLUSTRATION. STEP 1 Attach standard size metal bedrails (not included) to headboard (A) and front panel (D) to convert your crib into a full size bed.
Page 13
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G Convert your crib into a toddler bed with the Montana 2.0 Toddler Bed Conversion kit- model / SKU numbers DA1503-5-E / 39219022 (Espresso) or DA1503-5-G / 39219046 (Driftwood) sold separately. Convert your crib into a full size platform bed with the Montana 2.0 Bedrails- model / SKU numbers DA1503-8-E /39319024 (Espresso) or DA1503-8-G / 39319048 (Gray) sold separately.
Page 14
MONTANA 2.0 4 IN 1 CRIB DA1503B4-E / DA1503B4-G CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES (69CM...
Page 15
(including area code) Date & Place of Purchase: Part(s) description and quantity: (Please be sure to list model number or SKN number) Customer Service Representative Mailing Address: DHP Consumer Services, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1...