Advertisement
Quick Links
Advertisement
Related Manuals for JFA Electronicos K600
Summary of Contents for JFA Electronicos K600
- Page 1 K600 REMOTE CONTROL INSTRUCTION MANUAL...
-
Page 2: Operation
K600 REMOTE CONTROL - INSTRUCTION MANUAL DESCRIPTION The K600 allows you to control by distance¹ the main functions of the "player" and change music, folder, volume, pause, play and power. OPERATION Transmitter unit: Whenever an o key is pressed, an RF (radio frequency) signal, will be transmitted to the receiving unit. - Page 3 K600 REMOTE CONTROL - INSTRUCTION MANUAL BASIC COMMANDS TRANSMITTER UNIT 1. Volume control (+); 2. Volume control ( _ ); 3. Rewind the music; 4. Advance the music; 5. LED indicator; 6. Go up the folder; 7. Go down the folder;...
- Page 4 K600 REMOTE CONTROL - INSTRUCTION MANUAL BASIC COMMANDS OF THE RECEIVER UNIT 1 - RF receiver antenna; 2 - Led action, reception indicator; 3 - 12v power supply (black white stripe) and GND (black). 4 - Infra-red emitter (point to the front of the player);...
-
Page 5: Learn Mode
K600 REMOTE CONTROL - INSTRUCTION MANUAL ENCODING THE CONTROL LEARN MODE: The receiver has more than 220 models of audio and video devices stored in its memory see the attached table or on the website: jfaeletronicos.com Control: 1. Press the "M" key on the receiving unit (Indication 1), the action LED will be constantly lit;... - Page 6 K600 REMOTE CONTROL - INSTRUCTION MANUAL...
- Page 7 K600 REMOTE CONTROL - INSTRUCTION MANUAL...
- Page 8 K600 REMOTE CONTROL - INSTRUCTION MANUAL...
- Page 9 K600 REMOTE CONTROL - INSTRUCTION MANUAL...
- Page 10 K600 REMOTE CONTROL - INSTRUCTION MANUAL...
- Page 11 K600 REMOTE CONTROL - INSTRUCTION MANUAL...
- Page 12 K600 REMOTE CONTROL - INSTRUCTION MANUAL MEMORY MODE ENCODING TABLE 2 NOTE: Keys that must be pressed simultaneously: NUMBER MODEL CODE HB9750 HBDVD HBD9200 HBD9500, HBD9550AVN, HBD9600AW KENWOOD KDC MP2045V NAPOLI 9000 NAPOLI 9905 NAPOLI 8480 NAPOLI 1950, 9981 NAPOLI 4203, 4335, 5333...
- Page 13 K600 REMOTE CONTROL - INSTRUCTION MANUAL RECOMMENDED RECEIVER INSTALLATION The installation of the equipment in the sound system is done through a polarized power cable. Make sure the white-striped wire from the receiver unit is connected to the battery's direct positive (+12V) and the black wire to the negative (GND).
- Page 14 K600 REMOTE CONTROL - INSTRUCTION MANUAL RECOMMENDATIONS AND NOTES 1- Install the receptor unit at least 1 meter of the Alarms central or electronic injection module. It is recommended to install receptor in the trunk and the infrared emitting in the rear seat pointing to the front of the "CD player".