Advertisement
heat loss curve or the higher the operating efficiency. The closer a selected setting is to G, the steeper the
heat loss curve or the lower overall heat pump system efficiency. If knob is turned to "full" the WF II
will automatically go to "DT flat".
WF-LGR4 adjustments and settings – The normal/standby switch provides the standard user override
function (some power companies request inactivation or deletion of this switch).
Requires selection of the proper RV logic at the LGR4 board top center, see previous page.
Reference "WarmFlo Handheld Analyzer/Laptop Software" section in this manual for changes to your
chip functions.
01/10/2008
11
HI321
Advertisement
