Required Tools And Equipment - Cisco MWR 1941-DC-A Hardware Installation Manual

Cisco systems mobile wireless edge router hardware installation guide
Hide thumbs Also See for MWR 1941-DC-A:
Table of Contents

Advertisement

Chapter 2
Preparing to Install the Router
Inspect all items for shipping damage. If anything appears to be damaged, or if you encounter problems
installing or configuring your router, contact customer service. The Cisco Information Packet provides
warranty, service, and support information.

Required Tools and Equipment

You need the following tools and equipment to install and upgrade the router and its components:
Only trained and qualified personnel should be allowed to install or replace this equipment.
Warning
Statement 49
OL-7872-04
ESD-preventive cord and wrist strap.
Number 2 Phillips screwdriver.
Flat-blade screwdrivers: small, 3/16-inch (0.476 cm) and medium, 1/4-inch (0.625 cm).
To install or remove modules
To remove the cover, if you are upgrading memory or other components
#12-24 pan-head screws to secure the router to your equipment rack.
Cables for connection to the WAN and LAN ports (depending on the configuration).
For more information on cable specifications, see
Note
Ethernet hub or PC with a network interface card for connection to the Ethernet (LAN) port(s).
Console terminal (an ASCII terminal or a PC running terminal emulation software) that is
configured for 9600 baud, 8 data bits, no parity, and 2 stop bits.
Modem for connection to the auxiliary port for remote administrative access (optional).
Console cable for connection to the console port. You can supply this cable yourself or order one
from Cisco Systems, Inc. (part number ACS-1900ASYN=).
Ratcheting torque screwdriver with a Phillips head that exerts up to 15 pound-force inches (lbf-in)
of pressure.
Crimping tool as specified by the ground lug manufacturer.
10-AWG copper ground wire (insulated or noninsulated).
#6, ring-style ground lug.
18-AWG copper wire for the power cord.
Wire-stripping tool(s) for stripping both 10- and 18-AWG wire.
Serial interfaces may require a data service unit (DSU) or channel service unit/data service unit
(CSU/DSU).
Cisco MWR 1941-DC-A Mobile Wireless Edge Router Hardware Installation Guide
Appendix B, "Cable Specifications."
Site Planning
2-7

Advertisement

Table of Contents
loading

Table of Contents