Bushing Press Tool - Cannondale 120027.PDF Owner's Manual Supplement

bushing press tool - qc765/
The tool kit, includes items A-H shown below. These are necessary to remove the worn
sleeve bushings of both the the swingarm and upper link arms and press in new ones.
Follow the arrangement of the tool parts on the next two pages to replace bushings. See
replacements parts (kits) in this manual.
The tool kit a sizer for the upper link arm bushings (item G) and swingarm bushings (item
H). After the bushing are installed, use the tool to draw the sizer through the bushing.
Cannondale Kit # QC765/
H
G
C D E F
A
B
DO NOT USE SIZER H ON BRASS TYPE BUSHINGS
20