Figure 5-11: Setup Wizard's Select Your Internet Service Provider Screen (France); Figure 5-12: Setup Wizard's Configure Dsl - 1483 Bridged Screen - Cisco LINKSYS WAG54GS (EU) User Manual

Cisco systems network router user manual
Table of Contents

Advertisement

Available languages

Available languages

Wireless-G ADSL Gateway with SpeedBooster
12. The Internet Service Providers (ISPs) for your country will be listed. (The on-screen options will vary
depending on which country you selected on the previous screen.) Click the button for your ISP.
If your ISP is not listed, click the Next button to manually enter your settings.
13. If applicable, the Setup Wizard will automatically detect the Encapsulation type you use: 1483 Bridged, 1483
Routed, PPPoA, or PPPoE. To manually enter your settings, select your Encapsulation type: 1483 Bridged,
1483 Routed, PPPoA, or PPPoE.
NOTE: If your Encapsulation type is IPoA or Bridged Mode Only, you will have to use the
Gateway's Web-based Utility to configure it. Refer to "Chapter 6: Configuring the Wireless-G
ADSL Gateway with SpeedBooster" for instructions.
Proceed to the appropriate section for your Encapsulation type.
1483 Bridged
If you selected your ISP, then the Setup Wizard will automatically select the Encapsulation, VPI, VCI, and
Multiplexing settings. Then select the appropriate IP setting for your DSL connection.
If you need to manually enter your settings, use this screen.
VPI/VCI - If you need to manually enter your settings, enter the VPI (Virtual Path Identifier) and VCI (Virtual
Channel Identifier) settings provided by your ISP.
Multiplexing - If you need to manually enter your settings, select LLC or VC, depending on your ISP.
Auto IP - If you are using a dynamic IP address, then click the Auto IP radio button.
Static IP - If you are using a static IP address, then click the Static IP radio button. Complete the IP Address,
Subnet Mask, Default Gateway, Primary DNS (Domain Name System), and Secondary DNS fields. (You need to
enter at least one DNS server IP address.)
Click the Next button to continue or the Back button to return to the previous screen.
Chapter 5: Setting up the Wireless-G ADSL Gateway with SpeedBooster
Using the Setup Wizard
Figure 5-11: Setup Wizard's Select Your Internet Service
Provider Screen (France)
Figure 5-12: Setup Wizard's Configure DSL -
1483 Bridged Screen
16

Advertisement

Table of Contents
loading

Table of Contents