Pixel AFXSM-6 Installation Instructions

This kit is designed to permit the recep on and mul plexing on a single RG-6 cable of:
·
Satellite radio signals at 2.33 GHz (either Sirius or XM or both simultaneously)
·
FM Radio (88 -108 MHz)
·
AM radio (500 KHz to 1.7 MHz)
· HD Radio signals in the AM and FM bands
·
Over-the-air TV signals (with the addi on of two MB-2 spli ers and any standard TV antenna.
·
These items are not included and must be purchased separately)
Important installa on instruc ons:
·
Do not exceed 300 feet of cable between the antennas and the radios without addi onal amplifica on (Model MBA-12 or
Model SBA-1).
·
Make sure the red lead of the coax-to-twin lead AM radio adapter is connected to the terminal on the receiver marked anten-
na and the black lead is connected to the terminal marked Ground on the AM antenna connec on block.
·
Weather-proof all outdoor connectors to prevent moisture ingress. Cover any unused outdoor signal ports.
Supplied Accessories
Pixel Technologies, Inc. | www.pixelsatradio.com | contactus@pixelsatradio.com | (800) 595-0845 | Page 1
AFXSM-6 / AFXSM-5
AM / FM / Satellite Radio Antenna Kit
Installa on Instruc ons
QTY Included Items for AFXSM-5 or AFXSM-6
1 Satellite Radio Antenna either PRO-600 or PRO-500
(Not pictured)
1 Lot Moun ng Hardware for Satellite Antenna
1 Model AFHD-4 AM/FM Antenna
1 Lot Moun ng Hardware for AM/FM Antenna
1 Model AFST-1 AM / FM / XM Signal Spli er
1 Model AFS-1 AM / FM / XM Signal Combiner
2 F-71 F-male to F-male coupler
1 3 F-female to SMB plug cable
2 3 F-male RG-6 Cable
2 20 dB A enuator
2 10 dB A enuator
1 F-female to DIN Adapter
1 Twin Lead AM Radio Antenna Adapter
1 Weather Boot
2 Ground Lug and Star Washer
1 SBA-1 Inline Amplifier
1 DCT-100 Impedence Terminator
1 COAXSEAL