Advertisement
1) Please make sure that your callsign has been entered in your radio. If not, please refer the Operator Manual.
2) Enter the output frequency of GB7MT 439.6625MHz
Make sure the radio is in VFO mode.
Press
to toggle between VFO and
Memory mode.
Using the number keys on the microphone
type in
[4] [3] [9] [6] [6] [2]
The frequency 439.662
screen.
3) Set the mode to C4FM.
Press the
button until
mode indication is displayed. This will put
the radio is AMS mode, the radio will
automatically switch between DN, VW or
FM.
V1.0 22/07/2019 KB
Configure the Yaesu FTM-100DE for GB7MT
is displayed on the
50
above the
Yaesu UK Limited
Unit 12 Sun Valley Business Park, Winnall Close, Winchester, Hampshire, SO23 0LB
Technical
Information
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Yaesu GB7MT
Summary of Contents for Yaesu GB7MT
- Page 1 Configure the Yaesu FTM-100DE for GB7MT Information 1) Please make sure that your callsign has been entered in your radio. If not, please refer the Operator Manual. 2) Enter the output frequency of GB7MT 439.6625MHz Make sure the radio is in VFO mode. Press to toggle between VFO and Memory mode.
- Page 2 Technical V1.0 22/07/2019 KB Configure the Yaesu FTM-100DE for GB7MT Information 4) Setup the repeater shift frequency Press for one second or longer. The Setup Menu will be displayed. Rotate the DIAL to select [8 CONFIG]. Press Rotate the DIAL to select [5 REPEATER SHIFT] Press Rotate the DIAL to select [2 –...
- Page 3 Technical V1.0 22/07/2019 KB Configure the Yaesu FTM-100DE for GB7MT Information 5) Store the repeater frequencies into a memory channel. Press and hold Press MEMORY WRITE is displayed on the screen. To specify a memory channel name please refer to “Naming a memory channel” on page 56 of the operator manual.
Need help?
Do you have a question about the GB7MT and is the answer not in the manual?
Questions and answers