Service Work - ABB HT568964 Operation Manual

Operation Manual / 4 Product description / A100-M axial
5 Operation and service
5.2

Service work

Service work includes visual inspections, monitoring, measuring and inspection work as well
as function checks. Service work enables to detect and rectify changes to the turbocharger
and ensures full operability of the turbocharger.
Service intervals
Service work on the turbocharger that are omitted or performed too late can
cause excessive contamination, wear and operating failures.
CAUTION
Carry out the service work at the specified time intervals.

Shortened service intervals
Exceptional stresses such as several starts/stops per day, harsh environmen-
tal conditions, poor fuel quality or high system vibrations can lead to untimely
CAUTION
machine damage even if the prescribed service intervals are observed.
Agree on a shortened service interval with ABB Turbo Systems.

5-year service inspection
To prevent machine damage caused by ageing and downtime, we recom-
mend having an inspection carried out by an ABB Turbocharger Service Sta-
NOTICE
tion no later than 5 years after the last service.
5.2.1 Service procedures every 25 ... 50 hours
Visual check for air, exhaust gas, water and oil leaks.

Record operating data and enter in the engine logbook.

In case of deviations, determine the cause.

Unknown operational changes
Unknown operating conditions may result in problems ranging from impair-
ment to possible operating failure.
CAUTION
Unknown causes must be clarified by an ABB Turbocharging Service Station.

5.2.2 Service work at 100 hours after commissioning
Clean or replace the oil filter located in the supply pipe to the turbocharger while the en-

gine is stopped.
© Copyright 2016 ABB. All rights reserved. HZTL4033_EN
Page 31 / 113
Revision A July 2016