Download Print this page

Humanscale Element Disc Instructions

Portable luminaire

Advertisement

Quick Links

Occupancy Sensor
Element Disc has an occupancy sensor that auto-
matically turns the unit off when it does not detect
motion in the immediate area for ten (10) minutes.
Détecteur de Présence
Element Disc inclut un détecteur de présence
qui éteint automatiquement l'appareil quand il ne
détecte pas de mouvement dans la région
immédiate pendant dix (10) minutes.
Press the power button
to turn on the light and
the occupancy sensor.
Sensor on
A lit power button
Capteur marche
indicates that the
occupancy sensor
is on.
Appuyez sur le bouton
Marche / Arrêt pour
allumer la lumière et le
détecteur de présence.
Un bouton allumé
indique que le détecteur
de présence fonctionne.
To turn off the occupancy
5 s.
sensor, press and hold
the power button for
approximately five (5)
seconds until the light
flashes.
Pour désactiver le
détecteur de présence,
appuyez le bouton Marche
/ Arrêt pendant environ
cinq (5) secondes, jusqu'à
ce qu'il clignote.
3 times
The light will flash three (3)
3 fois
times to indicate that the
occupancy sensor has been
turned off. An unlit power
button indicates that the
occupancy sensor is off.
La lumière clignote trois (3)
fois pour indiquer que le
détecteur de présence a
été désactivé. Un bouton
Marche / Arrêt éteint
indique que le détecteur
de présence est éteint
Sensor off
To reactivate the
Capteur arret
occupancy sensor,
press the power button
for approximately five (5)
seconds until it is lit.
Pour réactiver le détecteur
de présence, appuyez sur
le bouton Marche / Arrêt
pendant environ cinq (5)
secondes jusqu'à ce
qu'il soit allumé
15
Element Disc
LED Light
Element Disc
LED Light

Advertisement

loading
Need help?

Need help?

Do you have a question about the Element Disc and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Humanscale Element Disc

  • Page 1 (5) seconds until it is lit. Occupancy Sensor Element Disc has an occupancy sensor that auto- Pour réactiver le détecteur matically turns the unit off when it does not detect de présence, appuyez sur motion in the immediate area for ten (10) minutes.
  • Page 2 Available with panel or slatwall mounts that fit the products of other companies, including Allsteel, Haworth, Herman Miller, Knoll, Steelcase, Teknion and more. FCC and ICES003 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.