Summary of Contents for KALE Hello light HL-ML6P60D
Page 1
660B 6*60w double face Led pixel zoom and strobe bar moving head User manual Please read the instructions carefully before use...
Page 2
TABLE OF CONTENTS 1. Safety Instructions ..................1 - 4 2. Technical Specifications ..................5 3. How To Control The Unit ..................7 4. DMX Channel List..................10-23 5. Shape.........................24 6.Trouble shooting....................25 statement product well capability intact packing when leave factory. All of the user should comply with warning item and manual, any misuse cause of the damages are not included in our guarantee, and also can not be responsible for any malfunction &...
Page 3
user, be sure that they also receive this instruction booklet. Unpack and check carefully there is no transportation damage before using the unit. Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit. It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
Page 4
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. DO NOT open the unit within five minutes after switching off. The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
Page 5
Power Voltage: AC 100-260V, 50/60Hz Control DMX Channel:34/54 Channels Control Protocol: DMX512/RDM Pan/Tilt Pan / Tilt : Infinite Rotation Pan/Tilt Resolution: 8/16 bit Magnetic coded reset system is adopted Construction Display:2.4 inch 180° reversible colorful LCD Display Data In/Out socket: 3-pin & 5-pin XLR sockets Power Socket: Power-Con in Protection Rating: IP20 Reset the light fixture by menu or console...
Page 6
3.LUX Data ( 6x60W wash face data) 4. Display & Menu...
Page 7
Display: MENU To select the programming functions DOWN To go backward in the selected functions To go forward in the selected functions ENTER To confirm the selected functions Set DMX Address Code Press "Menu" to "Set DMX Address",and press"ENTER" keys to enter into Show "Set DMX Address DMX Address:001",Press the "UP and DOWN"...
Page 8
1.Yes Forward or Tilt 2.No Reverse reversed 1.Yes setting Display 2.No 1.CH Value Each channel value Inform 2.Temp ____℃ Temperature of led board 3.Soft V1.0 Show the version number DMX 512 Control by DMX console Master AUTO Alone Mode Master SOUND Alone Pan:0--255...
Page 9
Strobe2:0-255 45 channels 45 channel mode Channel Channel 25 channels 25 channel mode 5.DMX Channel List Model 1 - CH54 Channel Function Description Value CH-1 Pan adjustment 0 --- 255 CH-2 Pan fine Pan fine adjustment 0 --- 255 CH-3 Tilt Tilt adjustment 0 --- 255...
Page 10
Clockwise rotating from 56 --- 155 CH-7 Tilt infinite rotation slow to fast Anticlockwise rotating from 156---255 slow to fast No function 0-15 CH-8 Strobe from fast to slow 16--214 strobe Random strobe 215--225 CH-9 Dimmer From dark to bright 0-255 Model - 1 0 --- 49...
Page 11
CH-19 White - 2 CH-20 Red - 3 0 --- 255 CH-21 Green - 3 CH-22 Blue - 3 0 --- 255 CH-23 White - 3 CH-24 Red - 4 0 --- 255 CH-25 Green - 4 CH-26 Blue - 4 CH-27 White - 4 CH-28...
Page 12
R 0%,G 100%,B up 56----75 CH-36 Static color R 0%,G100%,B up 76----95 R up,G0%,B100% 96----115 R 100%,G0%,B down 116----135 R 100%,G up,B up 136----155 R100%,G down,B100% 156----175 R100%,G 176----195 100%,B100%,W100% 2800K 196----200 3200K 201----205 3500K 206----210 4000K 211----215 4500K 216----220 6x60W 5000K 221----225...
Page 15
to bright CH-48 Dimming of two side red led from dark to 0--255 bright CH-49 Dimming of two side green led from dark to 0--255 bright CH-50 Dimming of two side blue led from dark to 0--255 bright No function 0--9 Dynamic pattern 1 10--19...
Page 16
Model 2 - CH34 Channel Function Description Value CH-1 Pan adjustment 0 --- 255 CH-2 Pan fine Pan adjustment 0 --- 255 CH-3 Tilt Tilt adjustment 0 --- 255 CH-4 Tilt fine Tilt adjustment 0 --- 255 CH-5 Pan/Tilt speed from fast to slow 0 --- 255 No function...
Page 17
from slow to fast No function 0 --- 15 CH-8 6*60w Strobe from slow to fast 16 --- 214 wash Random strobe 215---255 face CH-9 Dimmer From dark to bright 0 --- 255 Model - 1 0 --- 49 Model - 2 50 --- 99 CH-10 Dimmer Model...
Page 18
R 100%,G up,B0% 16----35 R down,G 100%,B0% 36----55 R 0%,G 100%,B up 56----75 R 0%,G100%,B up 76----95 R up,G0%,B100% 96----115 6*60w Static R 100%,G0%,B down 116----135 wash color R 100%,G up,B up 136----155 face CH-16 R100%,G down,B100% 156----175 R100%,G 176----195 100%,B100%,W100% 2800K 196----200...
Page 19
CH-16 6*60w Static 5500K 226----230 wash color 6000K 231----235 face 6500K 236----240 7000K 241----245 7500K 246----250 8000K 251----255 No function 0 ---- 9 Effects 3 DMX value per effect 10 --- 99 CH-17 Jump change 100 --- 149 gradual change 150 --- 255 Pattern -1 0 --- 19...
Page 21
Synchronously strobe 4--203 from slow to fast Random strobe 204--255 CH-27 Middle white Led 0-100% dimmer 0--255 Strobe face CH-28 Both side Red led 0-100% dimmer 0--255 CH-29 Both side Green led 0-100% dimmer 0--255 CH-30 Both side Blue led 0-100% dimmer 0--255 No function 0--9...
Page 22
CH31) No function 0--9 Pattern auto run Forward run from fast to 10--132 CH-33 speed(w slow ork with Reverse fun from slow to 133-255 CH31) fast No function 0 --- 79 CH-34 Reset Reset 80 --- 99 100 --- 255 6.
Page 23
7. Trouble shooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of power and main fuse. 2.
Page 24
settings and DMX polarity. 3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the unit or the previous one. 4. Try to use another DMX controller. 5. Check if the DMX cables run near or run alongside to high voltage cables that may cause damage or interference to DMX interface circuit.