Advertisement
TECHNICAL DATA
Type
Battery voltage
Stroke rate under no-load
Length of stroke
Cutting capacity
Wood
Metal
PVC pipe
Weight without battery pack
Noise Information
Measured values determined according to EN 62841. Typically, the A-weighted noise
levels of the tool are:
Sound pressure level / Uncertainty
Sound power level / Uncertainty
Wear ear protection!
Vibration Information
Vibration total values (triaxial vector sum) determined according to EN 62841.
Vibration emission value / Uncertainty
Cutting board
Cutting wooden beam
WARNING!
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in
accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of
exposure.
accessories, keeping the hands warm (in case of vibration), and organising work patterns.
COMPATIBLE BATTERY PACKS (NOT INCLUDED)
L1820R
A18B4
L1820S
L1840R
A18FB2
A18FB4
L1825R
L1850R
L1830R-X5
A18FB5
Use AEG 18V battery and charger only
WARNING! Read all safety warnings, instructions,
Failure to follow all instructions listed below may result in electric
for future reference.
RECIPROCATING SAW SAFETY WARNINGS
Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live" and could
give the operator an electric shock.
against your body leaves it unstable and may lead to loss of control.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended
to wear gloves, sturdy non slipping shoes and apron.
Sawdust and splinters must not be removed while the machine is
running.
16
L1860R
L1860R-X5
L1890R
Holding the workpiece by hand or
ENGLISH
Cordless reciprocating saw
L
=87.0 dB (A) / K
pA
L
=98.0 dB (A) / K
WA
a
h,B
a
h ,WB
Always use the protective shields on the machine.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
Do not use cracked or distorted saw blades.
Plunge cuts without pre-drilling a hole are possible with soft
materials (wood, light building materials for walls). Harder materials
the saw blade.
Always place the guide shoe on the workpiece when sawing.
cables and gas or water pipes.
Remove the battery pack before starting any work on the product.
immediately if it stalls. Do not turn on the product again while it is
Ambient temperature range for tool during operation is between 0°C
and 40°C.
Ambient temperature range for tool storage is between 0°C and
40°C.
The recommended ambient temperature range for the charging
system during charging is between 10°C and 38°C.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
product damage due to a short circuit, never immerse your tool,
chemicals, and bleach or bleach containing products, etc., can
cause a short circuit.
Do not dispose of used battery packs in the household refuse or
protect our environment.
A18SRSBL
18 V
0-3200 min
-1
22 mm
100 mm
40 mm
75 mm
1.78 kg
=5 dB(A)
pA
=5 dB(A)
WA
=7.5 m/s
2
/ K=1.5 m/s
2
=8.0 m/s
/ K=1.5 m/s
2
2
Advertisement
