Cisco CISCO1750 Installation Manual page 17

Router hardware
Table of Contents

Advertisement

Table 1
Key Features (continued)
Feature
Cisco interface cards
Console port
Auxiliary port
Security slot
SNMP support
AutoInstall support
Cisco ConfigMaker support
Cisco Voice Manager support
Compatible with Cisco Networked
Office stack
78-6169-02
Description
Supports two slots for either WAN interface cards (WICs)
or voice interface cards (VICs).
Supports one VIC-only slot.
Supports the following WICs: ISDN BRI (U and S/T), 56-
or 64-kbps DSU/CSU, FT1/T1 DSU/CSU, high-speed
serial, dual-serial, and 2Async/Sync.
Supports the following VICs: 2FXS, 2FXO, 2E&M.
Changes in WAN interface configuration can be made as
your network requirements change.
Supports router configuration and management from a
connected terminal or PC. Supports up to 115.2 kbps.
Supports modem connection to the router, which can be
configured and managed from a remote location. Supports up
to 115.2 kbps.
Supports Kensington or similar lockdown equipment.
Supports Simple Network Management Protocol (SNMP) to
manage the router over a network.
Supports AutoInstall to download configuration files to the
router over a WAN connection.
Supports Cisco ConfigMaker application, a wizards-based
software tool, to configure a network that includes the
Cisco 1750 router.
Supports Cisco Voice Manager to help you install and operate
voice and fax services over the IP network.
Stackable with other Cisco Networked Office stack products.
Cisco 1750 Router Hardware Installation Guide
Key Features
iii

Advertisement

Table of Contents
loading

This manual is also suitable for:

1750

Table of Contents