Operation Operation CAUTION Strictly follow the instructions given by the trailer manufacturer. Controls • Trailer lift/lower control as standard using a switch and foot switch • As an option: automatic lifting or lowering by simply pressing the foot switch – Once the trailers have been attached and connected hydraulically, step on the truck platform and press the "lift"...
Page 3
Operation – The position of the trailers (raised or low- ered) can be locked using the switch lo- cated near to the operator’s backrest. The operator can then step on and off the truck without affecting the position of the trailers. –...
Page 4
DANGER Risk of injury to the operator or others, and risk of damaging equipment due to poor visibility in reverse gear unladen. The operator must be trained to drive the truck. DANGER Risk of crushing feet of others due to automatic lowering of trailers when operator leaves platform.
Electrical system Description of components Description of components Description of components Component Initials Controller Battery charger A111 Diode card A112 Charger voltage socket support Tiller unit Power fuse Control fuse Battery Warning horn; Line switch Traction motor Pump motor Forward/reverse travel Tilt potentiometer 6P20 Multifunction indicator...
Page 8
Electrical system Description of components Base lift solenoid valve Base lift solenoid valve Solenoid valve only present on EXV12: used to stop forks instantaneously when being raised Option On-board charger (A11 + A111 + A112) 51048070301 [EN]...
Need help?
Do you have a question about the CX-T and is the answer not in the manual?
Questions and answers