Download Print this page

Advertisement

Quick Links

Benchy – Carbon 12V/24V Instruction Manual
KL18210
Instruction Manual
KegLand Distribution PTY LTD
www.KegLand.com.au
Last Updated 13/12/2021 4:54 PM
Page 1 of 13

Advertisement

loading
Need help?

Need help?

Do you have a question about the Benchy Carbon KL18210 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KegLand Benchy Carbon KL18210

  • Page 1 Benchy – Carbon 12V/24V Instruction Manual KL18210 Instruction Manual KegLand Distribution PTY LTD www.KegLand.com.au Last Updated 13/12/2021 4:54 PM Page 1 of 13...
  • Page 2 AVOID EXTERNAL HEAT SOURCES SUCH AS DIRECT SUNLIGHT, GAS STOVES OR OTHER HEAT GENERATING APPLIANCES. WARNING ONLY USE KEGLAND APPROVED CLEANERS AND SANITISERS TO CLEAN THE PRODUCT LINES. WARNING DO NOT SET THE TEMPERATURE BELOW 0°C OR YOU RISK FREEZING THE BEVERAGE YOU ARE DISPENSING.
  • Page 3: Installation Requirements

    Never use a battery charger, transformer/rectifier, battery eliminator or AC/DC converter to power the product (unless supplied by KegLand). Such equipment can, under certain circumstances, delivery current at a voltage which may damage the inverter. In order to use these devices always ensure that a battery is connected in parallel between the charging equipment and the product www.KegLand.com.au...
  • Page 4 (DC to DC converter). This ca be handy if you want to run the Benchy Carbon off commonly available 18V Drill Batteries. 12V Cut-Out 12V Cut-In 12V-Max 24V Cut-Out 24Cut-In 24V-Max 9.6V 10.9V 18.00V 21.3V 22.7V 31.5V www.KegLand.com.au Last Updated 13/12/2021 4:54 PM Page 4 of 13...
  • Page 5 After your taps are attached and your kegs are plumbed into your Benchy Carbon you can then hook CO2 up to your keg and set the pressure based on your desired carbonation level and the ambient temperature according to a carbonation chart. KegLand Carbonation Chart Further tips on how to balance your Benchy dispensing system with CO2...
  • Page 6 Benchy – Carbon 12V/24V Instruction Manual Benchy Carbon – Dispensing from Cornelius Ball Lock Kegs...
  • Page 7 Last Updated Page 6 of 9 13/12/2021 4:54 PM Benchy – Carbon 12V/24V Instruction Manual...
  • Page 8 Benchy Carbon – Dispensing from Commercial Kegs...
  • Page 9 Last Updated 13/12/2021 4:54 PM Page 7 of 9...
  • Page 10: Cleaning & Maintenance

    When adjusting your beverage line length to achieve the perfect pour it is always best to start with a longer length of beverage line as you can always trim a longer length of hose. CLEANING/MAINTENANCE Only use KegLand approved cleaners such as StellarOxy StellarClean...
  • Page 11 Stellarsan solution. Homebright streak free stainless steal cleaner and polish spray to clean the outside of the Benchy Carbon to leave it looking shiny and new. www.KegLand.com.au Last Updated Page 8 of 9 13/12/2021 4:54 PM Benchy – Glycol Instruction Manual...
  • Page 12 Thermal Fault of Electronic Unit (If the load on the compressor is too high or if the ambient temperature is too high the controller will not run until it cools down) Controller Hardware Fault (Controller detects abnormal parameters) WARRANTY AND SUPPORT (AUSTRALIA) The Benchy Carbon comes with a 12-month warranty when sold in Australia.
  • Page 13 Last Updated 13/12/2021 4:54 PM Page 9 of 9...