Advertisement
Quick Links
CLEVER BOARD 3
Getting Started:
Minimum equipment required to enable the system to work:
• Cleverboard 3
• Cleverproducts CD
• Interactive Pen with battery
• USB Cable
• Computer (Laptop or desktop)
• Projector
• VGA Cable
Loading Cleverboard 3 Drivers and Lynx Software:
• Place the Cleverproducts CD in the CD tray in your
computer, do not have the Cleverboard connected to the
computer at this time.
• A box will appear as per below:
Advertisement
Summary of Contents for Sahara CLEVER BOARD 3
- Page 1 CLEVER BOARD 3 Getting Started: Minimum equipment required to enable the system to work: • Cleverboard 3 • Cleverproducts CD • Interactive Pen with battery • USB Cable • Computer (Laptop or desktop) • Projector • VGA Cable Loading Cleverboard 3 Drivers and Lynx Software: •...
- Page 2 • Select Cleverboard 3 driver and click on “Go”. The driver installation will now take place but will not yet be complete. • Once the (part) driver installation has completed attach the Cleverboard 3 to the computer with the USB cable. •...
- Page 3 Calibration • At the computer, look along the taskbar at the bottom of the screen. From the taskbar on the bottom right hand side of the screen, locate the icon : Hover cursor over the icon and perform a right mouse click, scroll cursor up to “Settings”...
- Page 4 Troubleshooting : 1. There is no communication between the computer and the board : • Ensure computer is connected to board via USB cable. • Ensure Cleverboard 3 left hand door is open. • Check batteries in pen by listening for buzzing sound.