Chapter 3 Access To The Network Camera; Accessing By Web Browsers - HIKVISION DS-2CD63C5G0-IS User Manual

Chapter 3 Access to the Network
Camera

3.1 Accessing by Web Browsers

Note:
For certain camera models, HTTPS is enabled by default and the camera creates an
unsigned certificate automatically. When you access to the camera the first time, the
web browser prompts a notification about the certificate issue.
To cancel the notification, install a signed-certificate to the camera. For detailed
operation, see 6.2.5 HTTPS Settings.
Steps:
Open the web browser.
1.
In the browser address bar, input the IP address of the network camera, and press
2.
the Enter key to enter the login interface.
Note:
The default IP address is 192.168.1.64. You are recommended to change the IP
address to the same subnet with your computer.
Input the user name and password and click Login.
3.
The admin user should configure the device accounts and user/operator permissions
properly. Delete the unnecessary accounts and user/operator permissions.
Note:
The IP address gets locked if the admin user performs 7 failed password attempts
(5 attempts for the user/operator).
User Manual of Network Fisheye Camera
Login Interface
Figure 3-1
13