Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avantco 360DFC6HCL
Summary of Contents for Avantco 360DFC6HCL
- Page 1 User Manual May31,2021 Commercial Ice Cream Display Freezer User’s Manual 12/2019 Models 360DFC6HCL, 360DFC9HCL, 360DFC13HCL, 360DFC16HCL, 360DFF6HCL, 360DFF9HCL, 360DFF13HCL, 360DFF16HCL, 360DFF20HCL Please read the manual thoroughly prior to equipment set-up, operation and maintenance. - 1 -...
- Page 2 User Manual Warning DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING. DANGER – RISQUE DE FEU OU D’EXPLOSION. LE FRIGORIGÈNE EST INFLAMMABLE. CONFIER LES RÉPARATIONS À UN TECHNICIEN SPÉCIALISÉ. NE PAS PERFORER LA TUBULURE CONTENANT LE FRIGORIGENE.
- Page 3 User Manual Transportation and Installation Please read this manual thoroughly prior to equipment set-up, operation and maintenance. • To prevent compressor or system damage, do not transport the unit on an incline of more than 45 degrees. • Do not use the condenser, lid, or hinges as loading or unloading points. •...
- Page 4 User Manual Adjusting the Temperature The temperature in the cabinet can be adjusted with the control knob. If your unit has a numbered controller: Setting “4” is the standard for holding frozen products. Adjust the knob to a lower number (warmer) or higher number (colder) to change the temperature.
- Page 5 User Manual Operation/Maintenance NOTE: We strongly recommend that any servicing be performed by an authorized service technician. Loading Product • In order to save energy, limit the number of times the lid is opened and the length of time the lid is open. •...
- Page 6 1 year from the date of delivery. If a qualified product is found to be defective during this period, Avantco Refrigeration will repair the defective unit, replace any defective parts, or replace the defective unit.
Need help?
Do you have a question about the 360DFC6HCL and is the answer not in the manual?
Questions and answers
The lids on our display case slide realy hard. What ciuld be causing that? Are the gaskets bad