Network Configuration - LINOVISION R75 Quick Start Manual

R75 Quick Start Guide

5. Network Configuration

This chapter explains how to connect R75 to network via WAN connection or cellular.
5.1 Ethernet WAN Configuration
A. Go to "Network > Interface > WAN" to configure WAN parameters. Take static IP configuration as
an example. DHCP client and PPPoE type are optional according to your requirements.
Click "Save & Apply" button to make the changes take effect.
B. Connect WAN port to another router or modem.
C. Log in R75 web GUI via WAN port IP address and go to "Status > Network" to check if status is "up".
D. Go to "Network > Interface > Link Failover" to rise the WAN priority to 1.
www.linovision.com
13