ION ICUE Service Manual page 8

 
(A) REMOVE 5 PCS OF VR KNOB.
(B) REMOVE 1 PC OF NAME PLATE.
( )
C REMOVE 6 PCS OF SCREW FROM PITCH FADER AND CROSS FADER.
(D) DISCONNECT 3 PCS OF CONNECTOR TO REMOVE PITCH FADER PCB AND CROSS FADER PCB
 
(A) REMOVE 3 PCS OF SCREW FROM POWER PCB.
(B) DISCONNECT 2 PCS OF CONNECTOR TO REMOVE POWER PCB.
(C) REMOVE 4 PCS OF SCREW FROM SENSOR PCB.
(D) DISCONNECT 2 PCS OF CONNECTOR TO REMOVE SENSOR PCB.
(E) REMOVE 4 PCS OF SCREW FROM LINE FADER PCB.
(F) DISCONNECT 2 PCS OF CONNECTOR TO REMOVE LINE FADER PCB.
DISASSEMBLY PROCEDURES
  
DISASSEMBLY PROCEDURES
   
  
Fig.3
  
Fig.4
.