Table of Contents
Advertisement
ATTENTION!
Metal touching the wall of the cooking compartment
will cause sparks, which may damage the appliance or
the inner door pane.
Metal (e.g. a spoon in a glass) must be kept at least
▶
2 cm from the cooking compartment walls and the
inside of the door.
Not microwave-safe
Cookware and accessor-
ies
Metal cookware
Cookware with gold or sil-
ver decoration
8.3 Testing cookware for microwave
suitability
Test cookware to see whether it is suitable for mi-
crowave use. Testing cookware is the only time the ap-
pliance should be operated in microwave mode without
any food inside.
WARNING ‒ Risk of scalding!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
▶
Keep children at a safe distance.
▶
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to the maximum microwave power
2.
setting for 30 seconds to 1 minute.
Start the operation.
3.
Check the cookware several times:
4.
– If the cookware is cold or warm to the touch, it is
suitable for microwave use.
– If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
8.4 Configuring the microwave settings
Note:
Note the correct way to operate the microwave:
¡ Follow the safety instructions.
¡ Observe the instructions on how to prevent material
damage. → Page 6
¡ Observe the information on microwave-safe cook-
ware and accessories.
Press
or "Microwave".
1.
Press "Microwave output".
2.
Reason
Metal does not allow mi-
crowaves to pass
through. The food hardly
heats up.
Microwaves can damage
gold and silver decora-
tion.
Tip: You can only use this
kind of cookware if the
manufacturer guarantees
that it is microwave-safe.
Select the required microwave output.
3.
Press "Apply" .
4.
Press "Cooking time" .
5.
Set the required cooking time.
6.
→ "Setting the cooking time", Page 15
You can reset the set cooking time using
Press "Apply" .
7.
If an end time is required, set the end time.
8.
Press "End" .
‒
Set the required time.
‒
Press "Apply" .
‒
The appliance automatically switches itself on, and
then switches itself off at the preselected end time.
Use
to start the operation.
9.
a An audible signal sounds once the cooking time
has elapsed.
Tip: To ensure optimum use of your appliance, you can
refer to the information in the recommended settings.
→ "How it works", Page 22
8.5 Changing the microwave output setting
You can change the microwave output setting during
operation.
Press the set microwave output setting.
1.
Select the required microwave output.
2.
If the set cooking time exceeds the maximum cook-
ing time for the microwave output, the appliance
automatically reduces the cooking time.
Press "Apply" .
3.
8.6 Changing the cooking time
You can change the cooking time during operation.
Press the set cooking time.
1.
Set the required duration.
2.
Press "Apply" .
3.
8.7 Extending the cooking time
Once the cooking time has elapsed, you can continue
cooking the meal.
Press "Add extra cooking time" .
1.
Set the required cooking time.
2.
→ "Setting the cooking time", Page 15
You can reset the set cooking time using
Press "Apply" .
3.
Use
to start the operation.
4.
8.8 Pausing the operation
Open the appliance door or press
1.
a Operation is paused.
To continue operation, close the appliance door and
2.
press
.
a Operation continues.
8.9 Cancelling the operation
Press
.
▶
a The appliance stops any ongoing functions.
Microwave en
.
.
.
11
Advertisement
Table of Contents
