15 : 15,000 btu/hr 20 : 20,000 btu/hr Product Type WM : Wall Mouted Type Brand A : Acson Remark: * : Capacity value under Nomenclature is an indication. Please refer to Engineering and Physical Data for exact capacity value...
Page 6
Nomenclature ACK 06 EW - A C C Revision AA: Revision 1 AB: Revision 2 Specification C: AC Motor Cooling and Heating D: DC Motor Cooling and Heating Market C: Export with CE Mark E: Export without CE Mark Power Supply A: 220-240V/1Ph/50Hz F: 380-415V/3Ph/50Hz Product Series...
Page 7
20 : 20,000 btu/hr 25 : 25,000 btu/hr Fan Coil Unit Type CC : Ceiling Concealed Brand A : Acson Remark: * : Capacity value under Nomenclature is an indication. Please refer to Engineering and Physical Data for exact capacity value...
Page 8
12 : 1200 CFM 15 : 1,500 CFM Product Type CC : Ceiling Concealed Brand A : Acson Remark: * : Air Flow Rate value under Nomenclature is an indication. Please refer to Engineering and Physical Data for exact capacity value Note:...
Page 9
06 : 600 CFM 08 : 800 CFM Product Type CC : Ceiling Concealed Brand A : Acson Remark: * : Air Flow Rate value under Nomenclature is an indication. Please refer to Engineering and Physical Data for exact capacity value Note:...
Page 10
100 : 100,000 btu/hr 125 : 125,000 btu/hr 150 : 150,000 btu/hr Product Type DB : Ducted Blower Brand A : Acson Remark: * : Capacity value under Nomenclature is an indication. Please refer to Engineering and Physical Data for exact capacity value...
Application Information Application Information Model: AWM-JW Operating Limits: Thermal carrier : Water Water temperature : 4°C ~ 10°C (Cooling), 35°C ~ 50°C (Heating) Maximum water pressure : 16 bar Air temperature : (as below) Cooling Mode Temperature Ts °C/°F Th °C/°F Minimum indoor 19.0 / 66.2 14.0 / 57.2...
Page 14
Application Information Model: ACM-EW Operating Limits: Thermal carrier : Water Water temperature : 4°C ~ 10°C (Cooling), 35°C ~ 50°C Maximum water pressure : 16 bar Air temperature : (as below) Cooling Mode Temperature Ts °C/°F Th °C/°F Minimum indoor 19.0 / 66.2 14.0 / 57.2 temperature...
Page 15
Application Information Model: ACC-GW (MSP , LSP) Operating Limits: Thermal carrier : Water Water temperature : 4 ~ 10°C (Cooling) Maximum water pressure : 16 bar Air temperature : (as below) Cooling Mode Temperature Ts °C/°F Th °C/°F Minimum indoor 19.0 / 66.2 14.0 / 57.2 temperature...
Application Information Installation Guide System Configuration The standard controller board comes with a VALVE jumper and a HEAT jumper. The system can be configured as the jumper selection listed below: HEAT Jumper VALVE Jumper Heatpump Mode & Valve Application √ √...
Page 17
Application Information Model: ACK, ACM, ACC-CW CN_DRY LIVE CN_TW CN_PGRM CN_STP CN_DSP H_SEN C_SEN ROOM CN_WIR Valve Jumper Heat Jumper Fan Priority Jumper Jumper With Jumper (Default) Without Jumper User set speed or lower fan if auto Fan Priority Jumper Fan Stop when thermostat cat off mode is selected Heat Jumper...
Page 18
Application Information Indoor Installation Model: AWM-JW The indoor unit must be installed in such a way so as to prevent short circuit of the cool discharged air with the hot return air. Please follow the installation clearance shown in the figure. Do not place the indoor unit where there could be direct sunlight shining on it.
Page 19
Application Information Mounting Installation Plate Ensure that the wall is strong enough to withstand the weight of the unit. Otherwise, it is necessary to reinforce the wall with plates, beams or pillars. Use the level gauge for horizontal mounting, and fix it with 5 suitable screws for AWM07/10/15JW and 7 suitable screws for AWM20/25JW.
Page 20
Application Information Unit Installation • Measure and mark the position for the hanging rod. Drill the hole for the angle nut on the ceiling and fix the hanging rod. • The installation template is extended according to temperature and humidity. Check on dimensions in use. •...
Page 21
Application Information Drain Test • Connect the main drain pipe to the flexible drain. • Feed water from flexible drain hose to check the piping for leakage. • When the test is completed, connect the flexible drain hose to the drain connector on the indoor unit. Feed Water Main Drain Pipe Flexible Drain Hose...
Page 22
Application Information Model: ACM30/40/50EW Standard Mounting Ensure that the overhead supports are strong enough to hold the weight of the unit. Position the hanger rods (wall mounting bracket for floor standing), and check for its alignment with the unit. Also, check that the hangers are secured and the base of the fan coil unit is leveled in both horizontal directions, taking into account the gradient for drainage flow as recommended in Figure A.
Page 23
Application Information Figure B Hanger Bracket Washer Ceiling Washer Indoor Unit Drainage Pipe 250mm or less Utensils, furnitures or built-in architectural features must not protrude more than 250mm Floor 300mm (Min.) 1m or more 400mm or more Floor Standing Type...
Page 24
Application Information Model: ACC-CW The indoor unit must be installed such that there is no short circuit of the cool discharge. Respect the installation clearance. Do not put the indoor unit where there is direct sunlight on unit. The location is suitable for piping and drainage and it must have a large distance between a door and unit.
Page 25
Application Information Model: ACC-FWD The indoor unit must be installed such that there is no short circuit of the cool discharge. Respect the installation clearance. Do not put the indoor unit where there is direct sunlight on unit. The location is suitable for piping and drainage and it must have a large distance between a door and unit.
Page 26
Application Information Model: ACC-GW (MSP , LSP) The indoor unit must be installed such that there is no short circuit of the cool discharge. Respect the installation clearance. Do not put the indoor unit where there is direct sunlight on unit. The location is suitable for piping and drainage and it must have a large distance between a door and unit.
Page 27
Application Information Model: ADB Mounting Ensure that the overhead supports are strong enough to hold the unit’s weight. Position hanger rods and check for alignment with the unit. Check that hangers are secure and that the base of fan-coil unit is level in the two horizontal directions, taking into account the gradient recommended for drainage flow as shown.
Page 28
Application Information Cable Size Model Unit AWM / ACK / ACM Power supply cable size* Number of wire Recommended fuse* Model Unit ACC10CW ACC15CW ACC20CW ACC25CW Power supply cable size* Number of wire Recommended fuse* Model Unit ACC30CW ACC38/40/50/ ACC06/09/15FWD ACC18/24FWD 60CW Power supply cable size*...
Sound Data Sound Data Sound Pressure Level 1/1 Octave A-Weighted Sound Pressure (dBA), ref 20µPa Overall Noise Model Speed (dBA) Criteria 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High AWM07JW High AWM10JW High AWM15JW High AWM20JW High AWM25JW Microphone position: 1m in front and 0.8m below the vertical centre line of the unit. 1/1 Octave A-Weighted Sound Pressure (dBA), ref 20µPa Overall Noise Model...
Page 30
Sound Data 1/1 Octave A-Weighted Sound Pressure (dBA), ref 20µPa Overall Noise Model Speed (dBA) Criteria 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High ACK20EW High ACK25EW High ACK30EW High ACK40EW High ACK50EW Microphone position: 1.4m/*1.5m below the face center of the air return of the unit. 1/1 Octave A-Weighted Sound Pressure (dBA), ref 20µPa Overall Noise Model...
Page 31
Sound Data 1/1 Octave A-Weighted Sound Pressure (dBA), ref 20µPa Overall Noise Model Speed (dBA) Criteria 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High ACC10CW High ACC15CW High ACC20CW High ACC25CW High ACC30CW High ACC40CW High ACC50CW High ACC60CW Microphone position: 1.5m below the centre of the unit. (Tested with 2m length duct at the air discharge outlet and air return inlet).
Page 32
Sound Data 1/1 Octave Sound Pressure Level (dB, reference 20mPa) Overall Noise Model Speed Criteria 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz (dBA) High ACC06FWD High ACC09FWD High ACC12FWD High ACC15FWD High ACC18FWD High ACC24FWD High...
Page 33
Sound Data Model 1/1 Octave Sound Pressure Level (dB, reference 20mPa) Overall Noise Speed (LSP) Criteria 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz (dBA) High ACC02GW High ACC03GW High ACC04GW High ACC06GW High ACC08GW High ACC10GW...
Page 34
Sound Data 1/1 Octave Sound Pressure Level (dB, reference 20mPa) Overall Model Noise Speed (MSP) Criteria 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz (dBA) High ACC03GW High ACC04GW High ACC06GW High ACC08GW High ACC10GW High ACC12GW...
Sound Data Sound Power Level 1/1 Octave Sound Power Level (dB, reference 1pW) Overall Model Speed A (dBA) 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High AWM07JW High AWM10JW High AWM15JW High AWM20JW High AWM25JW Measured In Reverberation Chamber 1/1 Octave Sound Power Level (dB, reference 1pW) Overall Model Speed...
Page 36
Sound Data 1/1 Octave Sound Power Level (dB, reference 1pW) Overall Speed Model A (dBA) 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High ACK20EW High ACK25EW High ACK30EW High ACK40EW High ACK50EW Measured In Reverberation Chamber 1/1 Octave Sound Power Level (dB, reference 1pW) Overall Model Speed...
Page 37
Sound Data 1/1 Octave Sound Power Level (dB, reference 1pW) Overall Model Speed A (dBA) 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High ACC10CW High ACC15CW High ACC20CW High ACC25CW High ACC30CW High ACC38CW High ACC40CW High ACC50CW High ACC60CW Measured In Reverberation Chamber...
Page 38
Sound Data 1/1 Octave Sound Power Level (dB, reference 1pW) Model Overall Speed (LSP) A (dBA) 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High ACC02GW High ACC03GW High ACC04GW High ACC06GW High ACC08GW High ACC10GW High ACC12GW Measured In Reverberation Chamber...
Page 39
Sound Data 1/1 Octave Sound Power Level (dB, reference 1pW) Model Overall Speed (MSP) A (dBA) 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High ACC03GW High ACC04GW High ACC06GW High ACC08GW High ACC10GW High ACC12GW High ACC14GW High ACC16GW High ACC18GW High ACC20GW...
Page 40
Sound Data 1/1 Octave Sound Power Level (dB, reference 1pW) Overall Model Speed A (dBA) 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz High ACC06FWD High ACC09FWD High ACC12FWD High ACC15FWD High ACC18FWD High ACC24FWD High ACC30FWD Measured In Reverberation Chamber 1/1 Octave Sound Power Level (dB, reference 1pW) Overall Model...
Selection Process Selection Process Fan Performance Chart Example 1 : The following are the design requirements for ADB125W unit: Model: ADB125BW Supply Air Quantity 4200 External Static Pressure Step 1: From the fan curve (at 4200 CFM), Standard operating system; Total Static Pressure Internal Static Pressure External Static Pressure...
Page 70
Selection Process The following table summarizes the pulley data, motor size used for the FUD series, as manufactured: Pulley Center V-Belt V-Belt Motor Blower Motor Motor Distance, C Length Length Pulley Pulley Size Speed Model Diameter Diameter Horizontal Vertical Horizontal Vertical ADB125BW 1405...
Page 100
Fan Performance Chart ACC14GW (MSP) ACC14GW 0.48 0.44 HIGH 0.40 0.36 0.32 MEDIUM 0.28 0.24 0.20 0.16 0.12 LOWER LIMIT 0.08 1000 1200 1400 1600 1800 Air Flow 2059-010...
Page 101
Fan Performance Chart ACC16GW (MSP) ACC16GW 0.48 0.44 HIGH 0.40 0.36 0.32 MEDIUM 0.28 0.24 0.20 0.16 0.12 LOWER LIMIT 0.08 1000 1200 1400 1600 1800 2000 Air Flow 2059-011...
Page 102
Fan Performance Chart ACC18GW (MSP) ACC18GW 0.48 0.44 HIGH 0.40 0.36 0.32 MEDIUM 0.28 0.24 0.20 0.16 0.12 LOWER LIMIT 0.08 1000 1200 1400 1600 1800 2000 2200 23 25 60 62 Air Flow 2059-012...
Page 103
Fan Performance Chart ACC20GW (MSP) ACC20GW 0.48 0.44 HIGH 0.40 0.36 0.32 0.28 MEDIUM 0.24 0.20 0.16 0.12 0.08 0.04 LOWER LIMIT 0.00 1000 1200 1400 1600 1800 2000 2200 2400 23 25 Air Flow 2059-013...
Page 104
Fan Performance Chart ADB075BW mmAq HIGH MEDIUM 1000 1500 2000 2500 3000 1000 1500 2000 2500 3000 3500 4000 4500 5100 Air Flow...
Page 105
Fan Performance Chart ADB100BW mmAq MEDIUM HIGH 2000 2500 3000 3500 4000 3400 4000 4500 5000 5500 6000 6500 6800 Air Flow...
Page 106
Fan Performance Chart ADB125BW 1.5 kW 1.1 kW Standard Point Internal Static Pressure with air filter Internal Static Pressure w/o air filter 3500 4000 4500 5000 1800 2000 1652 2200 2360 Air Flow...
Page 107
Fan Performance Chart ADB150BW 1.5 kW 1.1 kW Standard Point Internal Static Pressure with filter 4000 4200 4400 4600 4800 5000 1890 2280 2360 2090 2180 1990 Air Flow 2055-013 Rev1...
Outlines & Dimensions Outlines & Dimensions Indoor Unit Model: AWM07/10/15/20/25W THE MARK SHOWS PIPING DIRECTION LEFT RIGHT TOP VIEW NAME PLATE SIGNAL RECEIVER TERMINAL BLOCK WITH EARTH INDOOR UNIT TERMINAL ON/OFF SWITCH SIDE VIEW BOTTOM BOTTOM ROOM TEMPERATURE THERMISTOR (INSIDE) LOUVER FRONT GRILLE FIXED SCREWS (INSIDE)
Page 122
Outlines & Dimensions Model: AWM07/10/15/20/25W t a l (5 spots in all) Through the wall hole Ø 65mm Drain hose position Liquid pipe end Gas pipe end ALTERNATIVE INSTALLATION PLATE FWW02/03/04L Dimension Model 07/10/15 t a l (7 spots in all) Through the wall hole Ø...
Page 123
Outlines & Dimensions Model: ACK10/15/20CW SEE DETAIL A DETAIL A Dimension Model 10/15/20 Note: Dimension in mm...
Page 124
Outlines & Dimensions Model: ACK20/25/30/40/50EW Dimension Model 20/25/30 40/50 Note: Dimension in mm...
Page 125
Outlines & Dimensions Model: ACM15/20/25EW DRAIN PIPE WATER INLET WATER OUTLET DETAIL A SEE DETAIL A Dimension Model 15/20/25 800 1090 230 Mounting Bracket Dimension Model 15/20/25 1073 Note: Dimension in mm...
Page 127
Outlines & Dimensions Model: ACC10CW LEFT PIPING WATER OUTLET WATER INLET RIGHT PIPING WATER OUTLET WATER INLET Dimension Model 808 774 702 741 267 662 662 225 115 218 411 351 211 211 Note: Dimension in mm...
Page 128
Outlines & Dimensions Model: ACC15/20/25CW LEFT PIPING DETAIL B FOR FWPMM6/7 DETAIL A FOR FWPMM4 WATER OUTLET WATER OUTLET WATER INLET WATER INLET SEE DETAIL A FOR FWPMM4 SEE DETAIL B FOR FWPMM6/7 WATER INLET WATER OUTLET RIGHT PIPING DETAIL A FOR FWPMM4 DETAIL B FOR FWPMM6/7 WATER OUTLET WATER OUTLET...
Page 129
Outlines & Dimensions Model: ACC30CW LEFT PIPING WATER OUTLET WATER INLET RIGHT PIPING WATER INLET WATER OUTLET Dimension Model 1292 1297 1225 1264 1174 Dimension Model Note: Dimension in mm...
Page 130
Outlines & Dimensions Model: ACC38/40/50/60CW LEFT PIPING WATER OUTLET WATER INLET RIGHT PIPING WATER INLET WATER OUTLET Dimension Model 1088 1105 1033 1072 1342 1358 1287 1326 1236 1542 1558 1487 1526 1436 Dimension Model Note: Dimension in mm...
Page 131
Outlines & Dimensions Model: ACC06/09/12/15/18/24/30FWD LEFT PIPING RIGHT PIPING Dimension Model 06/09 12/15 1060 1390 1246 1207 1210 1271 1600 1456 1417 1420 1481 Note: Dimension in mm...
Page 132
Outlines & Dimensions Model: ACC02/03/04/06GW (MSP , LSP) Dimension Model 02/03/04 Note: Dimension in mm...
Wiring Diagrams Wiring Diagrams Model: AWM07/10/15/20/25JW POWER SUPPLY 220-240V/1Ph/50Hz Model: ACK10/15/20CW WIRED CONTROLLER (OPTIONAL) POWER SUPPLY 220-240V/1Ph/50Hz TO 2/3 WAY VALVE...
Page 140
Wiring Diagrams Model: ACK20/25/30/40/50EW TO 2/3 WAY VALVE POWER SUPPLY 220-240V/1Ph/50Hz WIRED CONTROLLER (OPTIONAL) Model: ACM15/20/25EW WIRED CONTROLLER (OPTIONAL) POWER SUPPLY 220-240V/1Ph/50Hz TO 2/3 WAY VALVE...
Page 141
Wiring Diagrams Model: ACM30/40/50EW TO 2/3 WAY VALVE POWER SUPPLY 220-240V/1Ph/50Hz WIRED CONTROLLER (OPTIONAL) Model: ACC10/15/20/25CW (With Controller) WIRED CONTROLLER (OPTIONAL) POWER SUPPLY 220-240V/1Ph/50Hz TO 2/3 WAY VALVE...
Page 142
Wiring Diagrams Model: ACC30/38/40/50/60CW (With Controller) WIRED CONTROLLER (OPTIONAL) POWER SUPPLY 220-240V/1Ph/50Hz TO 2/3 WAY VALVE Model: ACC10/15/20/25CW (Without Controller)
Service & Maintenance Service & Maintenance Moving machinery and electrical power hazards. May cause severe personal injury or death. Disconnect from main power supply before servicing equipment. The unit is designed to give long life operation with minimum maintenance required. However, it should be regularly checked and the following items should be given due attention.
Troubleshooting Troubleshooting Model Board AWM07/10/15/20/25JW 50WJW ACK10/15/20CW ACK20/25/30/40/50EW ACM15/20/25/30/40/50EW ACC10/15/25/30/38/40/50/60CW ACC02/03/04/06/14/16/18/20GW No Controller Self Diagnostic Table - 50WJW Board Normal Operation/Fault Indication Action Error Code COOL/HEAT (GREEN/RED) Cool mode Green Heat mode Timer on Sleep mode on Fan mode on Dry mode on Room air sensor contact Call your dealer...
Page 149
Troubleshooting Self Diagnostic Table – W2 Board Error Fault Indication COOL LED Action Code Check room sensor Room sensor error (short/open) Blink 1 time connection/change room air sensor Check pipe water sensor Pipe water sensor error (short/open) Blink 2 times connection/change pipe water sensor Clear the clogging at drain...
Need help?
Do you have a question about the AWM Series and is the answer not in the manual?
Questions and answers