Table of Contents
Advertisement
Fault
Creasing.
and programme ter-
minated.
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The programme does
not start.
The length of the pro-
gramme changes dur-
ing the drying cycle.
Cause and troubleshooting
→ "Changing the dryness level", Page 23.
▶
→ "Adjusting the dryness level", Page 23.
▶
Anti-Crease not activated.
Activate the Anti-Crease function.
▶
→ "Buttons", Page 21
Condensation tank filled.
→ "Emptying the condensation container", Page 30.
1.
→ "Inserting the condensation container", Page 31.
2.
→ "Starting the programme", Page 28.
3.
Water drain hose is caught or jammed.
Ensure that the water drain hose is not kinked or
1.
trapped.
Route the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Water drain hose is blocked.
Rinse the water drain hose with tap water.
▶
The filter for the condensation tank is soiled.
→ "Clean the filter for the condensation tank.",
▶
Page 34.
The appliance uses condensation for the automatic
self-cleaning.
Not a fault – no action required.
▶
Water drain hose is not connected correctly.
Ensure that the water drain hose is connected cor-
▶
rectly.
→ "Connecting the water drain hose", Page 14
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 31
▶
You have not pressed Inicio/Pausa+Carga
Press Inicio/Pausa+Carga
▶
No programme set.
→ "Setting a programme", Page 27.
1.
→ "Starting the programme", Page 28.
2.
The programme operation is optimised electronically.
This may change the programme duration.
Not a fault – no action required.
▶
Troubleshooting en
.
.
37
Advertisement
Table of Contents
