Related Manuals for Westlab FXP Series
Summary of Contents for Westlab FXP Series
-
Page 1: Table Of Contents
WESTLAB FXP8M OPERATING MANUAL TABLE OF CONTENT 1. Applications 2. Specifications 3. Construction 4. Approvals 5. Guidelines 6. Do/ Don’t 8. General Cleaning 9. Installation 10. Operation 11. Servicing 12. Performance Test 13. Warranty Statement 14. Warning *Please read this instructions carefully before use. -
Page 2: Applications
WESTLAB 1. APPLICATIONS FXP8M The FXP range is a single chamber device used OPERATING to clean instruments and other hardware with ultrasonic energy in a mixed water/chemical solution. MANUAL 2. SPECIFICATIONS Model FXP8M Timer Mechanical (30min) Heating Power Tank Material... -
Page 3: Guidelines
WESTLAB 5. GUIDELINES FXP8M Always allow 5 minutes for fresh liquids to degas. • OPERATING Degassing is the action of removing air bubbles from the • solution, which is achieved from turning the ultrasonics on. MANUAL It is not recommended to operate unit for longer •... -
Page 4: General Cleaning
WESTLAB 8. GENERAL CLEANING: FXP8M The turnover of solution must be determined by the user • OPERATING to satisfy acceptable cleaning results of the finished article. If the contamination is heavy and difficult to remove, • MANUAL a pre-rinse in a heated solution could be enough to soften and loosen unwanted debris for ultrasonic cleaning. -
Page 5: 11. Servicing
WESTLAB 11. SERVICING FXP8M Unauthorized repairs will void warranty. • OPERATING Only Unisonics Australia employees should service • this ultrasonic cleaner. MANUAL The circuit board presents high-level voltage. • Improper testing or repair procedures could result in injury to the service person and damage to the product. -
Page 6: 13. Warranty Statement
WESTLAB 13. WARRANTY STATEMENT: FXP8M The MANUFACTURER of this machine, WESTLAB OPERATING AUSTRALIA PTY. LTD., warrants it to be free from defects in material and workmanship under normal use MANUAL and service and the purchaser shall be entitled to the following consideration:...
Need help?
Do you have a question about the FXP Series and is the answer not in the manual?
Questions and answers