Product Installation; Cleaning And Maintenance - Hafele TAP HT21-CH1F220U Instruction Manual

2. Product Installation

1. Rotate counterclockwise (5) to separate (5) (4) (3) from (1);
2. Install (1) and (2) from the installation table from top to bottom;
3. Confirm the expected installation angle of (1), and install (3) (4) (5) on the thread.
Turn (5) clockwise to the fastening position, lock (6) clockwise with cross screwdriver
4. Install (7) to the two inlet holes respectively to the fastening position ;
so that the body group and the installation table are firmly installed;
5. Lock the inlet water pipe (7) nut clockwise to the thread of the cold and hot water
outlet. Lock it with a wrench, open the cold and hot water inlet valve, and check that
there is no water leakage at the connection of each thread;
of the faucet, connect the hot water pipe on the left and the cold water pipe on the
6. Ensure that the hot and cold inlet pipes are properly connected. If standing in front

3. Cleaning and Maintenance

right .
2. If there is dirt, clean it with soft liquid or clear glass cleaner
1. Rinse with clean water and dry with a soft cloth
3. Do not use acidic detergent, granular detergent which does not break down easily
4. If there is a need, the aerator can be rotated down to be rinsed.
or soap
3