Download Print this page
Harman Kardon AVR 340 Quick Start Manual
Harman Kardon AVR 340 Quick Start Manual

Harman Kardon AVR 340 Quick Start Manual

Harman kardon avr 340: quick start
Hide thumbs Also See for AVR 340:

Advertisement

Thank you for purchasing a Harman Kardon
Guide will help you with a basic system installation. For detailed information
on any step in this Guide, please refer to the pages referenced in the
Owner's Manual. We strongly recommend that you read the Owner's
Manual for complete details on how to install, configure and operate the
AVR 340, as well as for the important safety information it contains.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the back
of the AVR 340 (see page 8).
Connections Color Guide
Audio Connections
Left
Right
Front
Center
Surround
Subwoofer
Surround Back
Digital Audio Connections
Coaxial
Optical
Video Connections
Composite
S-Video
Match the colored jacks on the AVR 340 to the appropriate
jacks on your source equipment or speakers. The colors are
standardized, but not all equipment or connectors use them.
®
AVR 340. This Quick-Start
AVR 340 QUICK-START GUIDE
FRONT
RIGHT
SPEAKER
CENTER
SPEAKER
(Green)
FRONT
LEFT
SPEAKER
(Red)
(White)
SUBWOOFER
(Purple)
SURROUND
LEFT
SPEAKER
(Blue)
SURROUND
SPEAKER
Step 1. Place your speakers in the listening room
(see pages 19–21).
SURROUND
RIGHT
SPEAKER
(Gray)
SURROUND
BACK
RIGHT
SPEAKER
(Tan)
BACK
LEFT
(Brown)
SPEAKER PLACEMENT

Advertisement

loading

Summary of Contents for Harman Kardon AVR 340

  • Page 1 Owner’s Manual. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 340, as well as for the important safety information it contains. Figure 1 – Speaker Placement The colors shown for each speaker correspond to the matching output terminal connection on the back of the AVR 340 (see page 8).
  • Page 2 FRONT RIGHT FRONT LEFT SPEAKER SPEAKER Step 2. Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver, and black (–) to black (–) (see page 16). Step 3. Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer (see page 16).
  • Page 3 However, either component video input may be reassigned using the Input Setup menu. Switch your TV set’s input to match the type of video used for the currently selected source. : Make sure the AVR 340 is turned off, then connect the Bridge optional to the DMP connector.
  • Page 4 Coax Device Connection Options : Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4, Coaxial 4 and Optical 4 inputs are on the front panel of the receiver. Device...