Connecting To Wifi - azur 851N Manual

16

Connecting to WiFi

Last updated: 八月 9, 2022 02:50. Revision #5679
Important Note: It is vitally important that your 851N remains connected to your network as often as possible. This will ensure that the unit is regularly
updated to meet essential security protocols, third party compatibility and the latest software requirements.
Failure to maintain your device with regular firmware updates as provided by Cambridge Audio will void the product warranty and is likely to cause major
issues to the unit in time. Please ensure that your unit is updated to the most current firmware version. Information on the latest firmware version for the
851N can be found here.
Note: The 851N is not compatible with captive portal networks. The 851N works only on 2.4GHz WiFi. Where possible, avoid the use of powerline adapters,
Wi-Fi signal boosters/extenders as these can disrupt the reliability of the network connection.
Connecting to a Wired Network
1. Ensuring the unit is powered down, connect a network cable (Category 5/5E straight-through Ethernet cable) between the 851N and your router.
2. Your 851N will now automatically connect to the network.
Connecting to a Wireless Network
Important note: Do not plug/unplug the wireless dongle when the unit is on.
1. Ensure that your 851N is in range of your wireless router, and then power on your unit.
2. On an iOS device go to Wi-Fi settings and under 'SETUP NEW AIRPLAY SPEAKER' select '851N'. Alternatively (or if using Android), when prompted on the
front panel display connect the 851N to the Wi-Fi network of your choice. Select your Wi-Fi network from the list and then enter your password.