Harman Kardon AVR 320 Product Information page 2

† MP3 playback requires a compatible S/P-DIF
signal, or an optional transcoder such as the
Harman Kardon DAL 150.
AVR 320
7.1-CHANNEL AUDIO/
VIDEO RECEIVER WITH
DOLBY* DIGITAL,
LOGIC 7 ® AND DTS-ES ®
EXTENDED SURROUND
Specifications
• Audio Section – Continuous
Average Power (FTC): (Stereo
Mode): 65 watts per channel into
8 ohms @ 20Hz – 20kHz, <0.07%
THD, both channels driven; (Five-
Channel Surround Mode): 55 watts
per channel into 8 ohms @ 20Hz –
20kHz, <0.07% THD, all channels
driven; High Instantaneous Current
Capability (HCC): ±35 amps
• Tuner – Usable Sensitivity: IHF
1.3µV/13.2dBf; THD at 1kHz with
100% Modulation: (Mono) 0.2%,
(Stereo) 0.3%; FM Adjacent
Channel Selectivity: ±400kHz, 70dB;
Ultimate (Maximum) S/N Ratio
(measuredat 1mV RF Input Level):
(Mono) 70dB, (Stereo) 68dB
• General – Dimensions (H x W x D):
6-1/2" x 17-5/16" x 17-1/8"
(165mm x 440mm x 435mm);
Weight: 32 lb (14.5kg)
[NOTE: Depth measurement includes knobs,
buttons and terminal connections; height
measurement includes feet and chassis.]
All features and specifications are subject
to change without notice.
Features
55W x 5 Into 8 Ohms, 20Hz –
20kHz at <0.07% THD, With All
Channels Driven Simultaneously •
High-Current (±35 Amps), Ultrawide-
Bandwidth (10Hz – 100kHz)
Amplifier Design Effortlessly Powers
the Most Dynamic Digital Sources •
Dual Power Supplies Independently
Drive Front and Rear Channels •
Remote Provides Manual
and Automatic Calibration of Audio
Output Levels, and Is Programmable
to Control up to Eight Devices From
Built-in Codes or Using Learning
Capability • Dolby Digital and DTS-
ES 6.1 Discrete and Matrix Surround
and DTS Neo:6 ® Decoding Using
Advanced, 24-Bit, Twin-Core Crystal
Chip Digital Engine • High-Resolution,
Ultralow-Noise, 192kHz/24-Bit
DACs • Dolby Pro Logic II (Movies,
Music and Emulation Modes)
Surround Sound Is Compatible With
Surround-Encoded or Stereo
Material but Delivers Detail That
Approaches Digital 5.1 Formats •
Harman-Exclusive Logic 7 Cinema
and Music Surround Sound
Processing in 5.1 and 7.1 Channels
for Superior Soundstage Imaging
and Playback of Both Surround-
Encoded and Stereo Recordings •
Two Modes of VMAx Virtual
Surround Sound Deliver the Home
Theater Experience With Only Two
Speakers • 5- and 7-Channel Stereo,
Hall and Theater DSP Surround
Sound Modes • MP3 Decoding
Through Coaxial or Optical Digital
(S/P-DIF) Inputs Enables Playback of
Hours of Music From a Compatible
†
Computer • FM Stereo/FM/AM
Tuner With 30 Presets and Direct-
Access Tuning • Wide-Bandwidth,
HDTV-Ready Component Video
Inputs and Outputs • 7.1 Preamp
Outputs for All Channels Allow the
Use of External Amplifiers, Such as
the Harman Kardon PA 2000 and
PA 4000 • Subwoofer Output for
Direct Connection to Powered
Subwoofer • Five A/V Inputs With
S-Video and Four Audio Inputs •
8-Channel Direct Inputs for Use
With External Surround Decoders •
Six Digital Inputs (Two Optical and
Two Coaxial on Rear Panel, and One
Optical and One Coaxial on Front
Panel) • Three Digital Outputs (One
Coax and One Optical Rear Panel,
One Coax Front Panel Switchable to
an Input or Output) • Front-Panel
A/V Input With S-Video • On-Screen
Display • Fully Color-Coded Rear-
Panel Connections Conform to CEA
Standards for Simplified Installation
• Multiroom/Multisource Audio Allows
Users in Separate Rooms to Listen to
Different Sources Simultaneously •
Includes Separate Zone II Remote
Control for Multiroom Operation, or
Simplified Operation in Main Room
• Programmable Power-Up Volume
• Rotary Bass, Treble and Balance
Controls
250 Crossways Park Drive
Woodbury, NY 11797
800-422-8027 FAX 516-682-3523
www.harmankardon.com
®